5.3.2
Adding or viewing a RAID configuration
You can add a new RAID configuration or view an existing configuration using the
View/Add Configuration command.
Adding a new RAID configuration
To add a new RAID configuration:
1.
From the Management Menu, highlight Configure, then press <Enter>.
2.
Use the arrow keys to select View/Add Configuration, then press <Enter>.
3.
The ARRAY SELECTION MENU displays the available drives connected
to the SATA ports. Select the drive(s) you want to include in the RAID set,
then press <SpaceBar>. When selected, the drive indicator changes from
READY to ONLIN A[X]-[Y], where X is the array number, and Y is the drive
number.
The information of the selected hard disk drive displays at the bottom of the
screen.
ASUS P5BV(P)-E Series
5-21