Asus H87-PRO User Manual page 32

•
•
•
2. USB 3.0 connector (20-1 pin USB3_12)
This connector allows you to connect a USB 3.0 module for additional USB 3.0 front
or rear panel ports. With an installed USB 3.0 module, you can enjoy all the benefits of
USB 3.0 including faster data transfer speeds of up to 5Gbps, faster charging time for
USB-chargeable devices, optimized power efficiency, and backward compatibility with
USB 2.0.
H87-PRO
H87-PRO USB3.0 Front panel connector
•
•
1-18
These connectors are set to [AHCI Mode] by default. If you intend to create a Serial
ATA RAID set using these connectors, set the SATA Mode item in the BIOS to [RAID
Mode]. Refer to section 3.6.3 SATA Configuration for details.
Before creating a RAID set, refer to section 5.1 RAID configurations or the manual
bundled in the motherboard support DVD.
When using NCQ, set the SATA Mode in the BIOS to [AHCI Mode]. Refer to section
3.6.3 SATA Configuration for details.
USB3_12
The USB 3.0 module is purchased separately.
These connectors are based on xHCI specification. We recommend you to install the
related driver to fully use the USB 3.0 ports under Windows 7.
®
Chapter 1: Product introduction