D-Link EasySmart DGS-1100-08P Manual page 20

Easysmart series switch

Hide thumbs Also See for EasySmart DGS-1100-08P:

Table of Contents

To apply the configuration, insert the correct device password in the Confirm Password box and then click

Password Manager

Select a switch from the Device List. Click on this icon to launch the Device Password Manager window.

Here you can enter a new password and confirm it.

Firmware Upgrade

Select one or many switches of same model name from the Device List. Click on this icon to launch the

Firmware Upgrade window. Specify the Firmware Path (or Browse for one) that you are going to use. Input

the correct password of device, and then click Upgrade. The state will show "OK" after completion, and "Fail"

is firmware upgrade fails or cannot be completed for any reason.

Figure 26 – SmartConsole Device Settings

NOTE: The EasySmart Switch automatically

sends out discovery packets to maintain the

connection

between

SmartConsole

Utility.

configure the Group Interval setting.

Figure 27– SmartConsole Password Manager

D-Link EasySmart Switch User Manual

the

devices

and

Therefore,

ensure

Table of Contents

Show Quick Links

Table of Contents