Table of Contents
Advertisement
3.
The following screen appears. Select a channel and press <Enter> to enter
the setup.
LSI Corp Config Utility
Adapter List
Adapter
SAS1064E
Esc = Exit Menu
Alt+N = Global Properties -/+ = Alter Boot Order
The numbers of the channel depend on the controller.
4.
The Adapter Properties screen appears.
Use the arrow keys to select RAID Properties, then press <Enter>.
LSI Corp Config Utility
Adapter Properties -- SAS1064E
Adapter
PCI Slot
PCI Address(Bus/Dev/Func)
MPT Firmware Revision
SAS Address
NVDATA Version
Status
Boot Order
Boot Support
RAID Properties
SAS Topology
Advanced Adapter Properties
Esc = Exit Menu
Enter = Select Item -/+/Enter = Change Item
6-4
v6.18.01.00 (2007.08.08)
Global Properties
PCI
PCI
PCI
PCI
FW Revision
BUS
Dev
Fnc
Slot
07
00
00
00
1.22.01.00-IR
F1/Shift+1 = Help
v6.18.01.00 (2007.08.08)
F1/Shift+1 = Help
Status
Boot
Order
Enabled
0
Ins/Del = Alter Boot List
SAS1064E
00
07:00:00
1.22.01.00-IR
50000065:41236545
2B.00
Enabled
0
(Enabled BIOS & OS)
Chapter 6: RAID configuration
Advertisement
Table of Contents
