Power Requirements; Quick Start; Control Panel - Hamilton Beach HBH850 - 64 oz Commercial Blender Operation Manual

Control Panel

AUTOBLEND button
Blender automatically
stops when drink is at
the right consistency.
START button
Starts the
selected cycle.
PULSE button
Press and hold to
run the blender at
HIGH for
short bursts.
STOP button
Stops operation
of the selected
function.
Does not shut
off power to
the blender.
NOTE:
The display will show the last cycle run when
not in use.

Power Requirements

Use a fused electric outlet for the blender. Depending on the model of your blender, the plug will look like
the following to meet power requirements:
120 VAC, 60Hz
Ground
prong
Blender Operation – Quick Start Guide
1. Read Important Safety Instructions and Warning
Symbol Explanations before use.
2. Place the blender on a dry, level surface.
3. Make sure the power switch is OFF (O). Plug the
blender into a grounded 3-prong electrical outlet.
4. Place the container on the base with ingredients and
container lid in place.
JUMP button
Blender automatically
changes speed from
LOW to HIGH during
the cycle.
Custom cycle buttons A–D
Store your favorite cycles and
recall them quickly using
buttons A–D.
230 VAC, 50Hz
LOW/HIGH buttons
Use to select the
blending speed.
UP/DOWN buttons
Press the ▲ or ▼ button to
scroll through options in the
display or to adjust settings.
230 VAC, 50Hz
5. Press the Power ON (I)/OFF (O) button to turn the
blender ON (I). The red LED lamp indicates that
power is ON (I).
6. Select the desired function (AUTOBLEND, HIGH,
LOW, or JUMP).
NOTE: Use the Jump Cycle for automatic speed
adjustment from LOW to HIGH during the
blending cycle.
7. Press START.
POWER ON (I)/
OFF (O) button
Turns blender on
and off. (May be
on side of upper
base housing on
select models.)
Display
See the
following pages
for status
messages.
MORE
Press to display
additional text.
5