Lenovo ThinkPad S430 User Manual page 110

• Default values are in boldface. The default settings are already optimized for you. If you consider
changing the computer configuration, proceed with extreme caution. Setting the configuration incorrectly
might cause unexpected results.
• On each submenu, press Enter to show selectable options and select a desired option, or type desired
values from the keyboard directly.
• Some items are displayed on the menu only if the computer supports the corresponding features.
The following table lists the Config menu items.
Table 4. Config menu items
Menu item
Network
94
User Guide
Submenu item
Wake On LAN
Ethernet LAN Option ROM
(for Legacy Only boot
mode or Both with Legacy
first)
UEFI IPv4 Network Stack
(for Legacy Only boot
mode or Both with Legacy
first)
UEFI IPv6 Network Stack
(for UEFI Only boot mode
or Both with UEFI first)
UEFI PXE Boot Priority
(for UEFI Only boot mode
or Both with UEFI first)
Wireless LAN Radio
Selection
• Disabled
• AC Only
• AC and Battery
• Disabled
• Enabled
• Disabled
• Enabled
• Disabled
• Enabled
• IPv6 First
• IPv4 First
• On
• Off
Comments
Enable the system to Power on
when the Ethernet controller
receives a magic packet (a
special network message).
If you select AC Only, the Wake
on LAN function is enabled only
when the ac power adapter is
attached.
If you select AC and Battery,
the Wake on LAN function is
enabled with any power sources.
Notes:
• The magic packet type Wake
on LAN requires ac power.
• The Wake on LAN function
does not work when a hard
disk password is set.
Load the Ethernet LAN Option
ROM to enable startup from an
integrated network device.
Enable or Disable UEFI IPv4
Network Stack for UEFI
environment
Enable or Disable UEFI IPv6
Network Stack for UEFI
environment
Select Network Stack Priority for
UEFI PXE Boot.
If you select On, the internal
wireless radio is turned on. If you
select Off, the internal wireless
radio is turned off.