LICENSING AGREEMENT 1. Copyright The copyright for this software is owned by Fuji Photo Film Co., Ltd. (“FUJI”). 2. Prohibitions You may not (1) copy, modify or adapt any or all parts of this software; (2) provide this software to a third party in the from of a copy, loan or gift; or (3) reverse engineer this software. 3.
Page 3
INTRODUCTION ● This manual gives procedures for installing and using the PICTROGRAPHY 3500 printer driver, as well as several precautions. ● This software requires a SCSI adapter. Before installation, check that a functioning SCSI adapter has been installed in your computer. ●...
CONTENTS 1. PRINTER DRIVER ... 4 Outline ... 4 Features ... 4 Operating Environment ... 4 2. PRECAUTIONS FOR USING THE PRINTER DRIVER ... 5 Windows ... 5 2.1.1 Setting up the PICTROGRAPHY ... 5 2.1.2 Installing the ASPI Manager ... 5 2.1.3 Network setup (for network printing)...
Page 5
Macintosh (Mac OS 9 or earlier) ... 33 3.6.1 For Local Printing ... 33 3.6.2 For Network Printing ... 33 3.6.2.1 Installing to the server ... 33 3.6.2.2 Installing to client computers ... 34 3.6.3 Uninstall ... 35 Macintosh (Mac OS X) ... 35 3.7.1 For Local Printing ...
1. PRINTER DRIVER 1.1 Outline The PICTROGRAPHY 3500 is capable of delivering ultrahigh, image-quality prints having a near-photograph appearance coupled with rich expressive power. Resolution is a high 400 dpi (max.) and 16,700,000 colors are available, all implemented by a laser-exposed thermal development transfer system (the silver halide photographic system).
2. PRECAUTIONS FOR USING THE PRINTER DRIVER This section explains various items that need to be set up before you can use the printer driver. 2.1 Windows 2.1.1 Setting up the PICTROGRAPHY The PICTROGRAPHY 3500 is shipped from the factory with its device type set to [Printer].
3. INSTALLATION 3.1 Windows 95 3.1.1 Connecting the PICTROGRAPHY 3500 for the first time Unless the printer driver is already installed, when you start your computer with PICTROGRAPHY 3500 for the first time, one of the following windows is displayed as Windows 95 starts, depending on your specific version of Windows 95.
for UC type 6. Click the [Finish] button. The following is displayed when the file is copied: In certain cases, the following prompt may be displayed when you copy the file: [The file ‘PG35. DRV’ on Windows 95 CD- ROM could not be found. Insert Windows 95 CD-ROM into the drive selected below, and click OK.
9. Confirm that "FUJIFILM PICTROGRAPHY3500" appears in the [Printers:] field and click the [Next] button. The following is displayed when the file is copied: 10. Select [PICTRO SCSI: FUJIFILM PICTRO SCSI Port ] in [Available ports:] and click the [Next] button. The following appears: 11.
3. Click the [FUJIFILM PICTROGRAPHY3500] icon and click [Sharing...] on the [File] menu. 4. The [FUJIFILM PICTROGRAPHY3500 Properties] dialog box is displayed. 5. Select [Shared As:]. 6. Set a Share Name. The default Share Name is currently displayed on the screen. You may select any printer in place of the default printer.
Page 12
3. INSTALLATION 6. Make the appropriate setting in [Network path or queue name:]. Specify the server name to which the PICTROGRAPHY 3500 is connected on the network and its Share Name. For example, if the computer name for the server is SERVER and the Share Name for the PICTROGRAPHY 3500 connected to the server is PG3500, enter the following: \\SERVER\PG3500...
1. Select [Setting] > [Printer] from the [Start] menu. The [Print- ers] folder window appears. 2. Click the [FUJIFILM PICTROGRAPHY3500] icon, then click [Delete] from the [File] menu. You will be prompted to confirm the delete. Click the [Yes] but- ton.
3. INSTALLATION 6. Confirm that the FUJIFILM PICTROGRAPHY3500 driver file has been detected. Click the [Next] button. The following is displayed when the file is copied: 7. For the remainder of the installation procedure, skip to step 10 in "3.2.2 For Local Printing".
9. Confirm that "FUJIFILM PICTROGRAPHY3500" appears in the [Printers:] field and click the [Next] button. The following is displayed when the file is copied: 10. Select [PICTRO SCSI: FUJIFILM PICTRO SCSI Port] in [Available ports:] and click the [Next] button. The following appears: 11.
3. INSTALLATION 4. The [FUJIFILM PICTROGRAPHY3500 Properties] dialog box is displayed. 5. Select [Shared As:]. 6. Set a Share Name. The current default Share Name is displayed. You may select any printer in place of the default printer. Enter the comment and password, if required.
Page 17
6. Make the appropriate setting in [Network path or queue name:]. Specify the server to which the PICTROGRAPHY 3500 is con- nected on the network and its sharing name. For example, if the computer name for the server is SERVER and the Share Name for the PICTROGRAPHY 3500 connected to the server is PG3500, enter the following: \\SERVER\PG3500...
1. Select [Setting] > [Printer] from the [Start] menu. The [Print- ers] folder window is displayed. 2. Click the [FUJIFILM PICTROGRAPHY3500] icon, then click [Delete] from the [File] menu. You will be prompted to confirm the delete. Click the [Yes] but- ton.
Page 19
E:\Win95_98English\CE (*If your CD-ROM drive is E: drive) For UC Type: E:\Win95_98English\UC (*If your CD-ROM drive is E: drive) 8. Confirm that [FUJIFILM PICTRO SCSI Port] appears in the [Available Printer Ports:] field and click the [New Port...] but- ton.
Page 20
3. INSTALLATION 14. Confirm that "FUJIFILM PICTROGRAPHY3500" appears in the [Printers:] field and click the [Next] button. The following appears. 15. Specify a printer name in the field currently displaying the name of the default printer. You may select any printer in place of the default printer.
3.3.2 For Network Printing For network printing, install printer drivers in both the server and client computers by the respective procedures described below. 3.3.2.1 Installing to the server 1. To install the printer driver, follow steps 1. through 15. in "3.3.1 For Local Printing".
Click to select [Setting] > [Printer] from the [Start] menu. The [Printers] folder window is displayed. 2. Click the [FUJIFILM PICTROGRAPHY3500] icon, then click [Delete] from the [File] menu. You will be prompted to confirm the delete. Click the [Yes] but- ton.
Page 23
[Copy files from:] field. Click the [OK] button. The following appears. 7. Confirm that [FUJIFILM PICTRO SCSI Port] appears in the [Available port types;] field, and then click the [New Port] button. The following is displayed when the file is copied.
Page 24
3. INSTALLATION 9. Now install the printer. Click the [Add Printer] icon in the [Printers] folder window. The [Add Printer Wizard] dialog box is displayed. 10. Click the [Next] button. The following appears. 11. Select [Local Printer] and uncheck [Automatically detect and install my plug and Play printer].
Page 25
14. Click the [OK] button. The following appears. 15. Confirm that "FUJIFILM PICTROGRAPHY3500" appears in the [Printers:] field and click the [Next] button. The following appears. 16. Specify a printer name in the field where the name of the default printer is currently displayed.
"3.4.2.2 Installing to client computers." Do not execute [Print Test Page]. (3) Click to select [Setting] > [Printer] from the [Start] menu. This displays the [Printers] folder. Click the [FUJIFILM PICTROGRAPHY3500] icon and click [Properties] in the [File] menu. This displays the [FUJIFILM PICTROGRAPHY3500 Prop- erties] dialog box.
3. Enter the location of the printer in the [Location] field and the description of the printer in the [Comment] field, or click the [Next] button without entering anything. 4. Continue installation of the printer driver according to the pro- cedure described in step 18 and subsequent steps in "3.4.1 For Local Printing".
Click to select [Setting] > [Printer] from the [Start] menu. The [Printers] folder window is displayed. 2. Click the [FUJIFILM PICTROGRAPHY3500] icon, and then click [Delete] from the [File] menu. You will be prompted to confirm the deletion. Click the [Yes] button.
3.5.1 For Local Printing To enable local printing, install the printer driver as follows. 1. Insert the PICTROGRAPHY3500 Printer Driver CD-ROM into the PC. 2. Click to select [Printers and Faxes] from the [Start] menu. The [Printers and Faxes] folder window is displayed. 3.
Page 30
3. INSTALLATION 7. Confirm that [FUJIFILM PICTRO SCSI Port] appears in the [Available port types] field, click the [New Port] button, and then click the [Close] button. The following is displayed when the file is copied. 8. Confirm that [PICTRO SCSI:] appears in [Ports on this server], and then click the [Close] button.
Page 31
[Copy manufacturer’s files from] field. 16. Click the [OK] button. The following appears. 17. Confirm that "FUJIFILM PICTROGRAPHY3500" appears in the [Printers:] field and click the [Next] button. The following appears. 18. Specify a printer name in the field where the name of the default printer is currently displayed.
3. INSTALLATION 19. Select [Do not share this printer], and then click the [Next] button. The following appears. 20. Choose to print or not print a test page following the completion of printer driver installation. Make your selection and click the [Next] button.
Test Page]. (3) Click to select [Printers and Faxes] from the [Start] menu. This displays the [Printers and Faxes] folder. Click the [FUJIFILM PICTROGRAPHY3500] icon and then click [Prop- erties] in the [File] menu. This displays the [FUJIFILM PICTROGRAPHY3500 Prop- erties] dialog box.
Page 34
3. INSTALLATION 5. Select [A network printer, or a printer attached to another computer], and then click the [Next] button. The [Specify a Printer] dialog box is displayed. 6. Select [Connect to this printer (or to browse for a printer, select this option and click Next)].
Click to select [Printers and Faxes] from the [Start] menu. The [Printers and Faxes] folder window is displayed. 2. Click the [FUJIFILM PICTROGRAPHY3500] icon, and then click [Delete] from the [File] menu. You will be prompted to confirm the deletion. Click the [Yes] button.
3. INSTALLATION 4. Click the installed (copied) [PictroGraphy] folder and open the [Sharing] menu in the Finder. With Mac OS 8.5 or later versions, select the [File] > [View Information] > [Sharing] menu in the Finder. With earlier Mac OS versions, select the [File] > [Sharing] menu in the Finder.
6. Choose the [PictroGraphy] folder and click the [OK] button. This places the server's [PictroGraphy] folder on the desktop. 7. Click [PictroGraphy 3500] in the [Chooser] window. You will be prompted as follows: "Connection to server not set. Set an appropriate server". Click the [OK] button. If this prompt does not appear and the [Chooser] window remains open, se- lect [Network Printer] and click the [Set] button.
Page 38
3. INSTALLATION 5. Click the [Continue] button. The following dialog box appears. 6. Select a destination volume to install the printer driver and then click the [Continue] button. The following dialog box appears. 7. Click the [Install] button. The following dialog box appears. 8.
Page 39
13. Click [Network]. The [Network] window appears. Select [Built-in Ethernet] from the [Show] pop-up menu and then click the [TCP/IP] tab. The following appears. Confirm that the TCP/IP settings are correct, and then close the window. 14. Open the [Applications]>[Utilities] folders on the hard disk. The following appears.
3. INSTALLATION 18. Select [FUJIFILM Pictro SCSI] from the pop-up menu. When a PICTROGRAPHY 3500 connected to the computer is found, its printer name is displayed on the [Product] column. 19. Select the PICTROGRAPHY 3500 to be used and then click the [Add] button.
5. Click the [Services] tab. The following appears. 6. Mark the [Printer Sharing] check box with a " √ " and close the [Sharing] window. Installation of PICTROGRAPHY 3500 Printer Driver for Mac OS X is completed. To enter the comment displayed on the [Location] column of the [Printer List] window, perform the following procedure.
3. INSTALLATION The [Printer Info] window appears. Displayed information cannot be changed from the client computers. 3.7.3 Uninstall The printer driver uninstall procedure is shown below. Even if the uninstall procedure below is performed, the installed printer driver files are not deleted. Normally, there is no need to de- lete the printer driver files.
CE type for UC type Select [PICTROGRAPHY3500] for [Printer Name:]. 2. Selecting a paper size After choosing the printer name in step 1, click the [Properties] button. This opens the [FUJIFILM PICTROGRAPHY3500 Proper- ties] dialog box. for CE type...
Page 44
• [Version information] button Click this button to display the Version Information screen for the printer driver. 3. Image processing setting options Click the [Image processing setting] tag on the [FUJIFILM PICTROGRAPHY3500 Properties] dialog box to display the following: • ICM Check this box if you plan to use the Windows color manage- ment function (ICM).
Spooler 1. Checking the print status Click to select [Setting] > [Printer] from the [Start] menu. This opens the [Printers] folder window. Double-click the [FUJIFILM PICTROGRAPHY3500] icon appearing in the window. This opens the [FUJIFILM PICTROGRAPHY3500] dialog box. The document name and status are displayed here for any docu- ment currently printing or waiting to print, if any.
The settings entered here are assumed as default values for the application software [Print] command. 2. Image processing setting Click the [Image processing setting] tab on the [FUJIFILM PICTROGRAPHY3500 Properties] dialog box. For informa- tion on setup items, see “4.1.2 Print setup and printing”.
Page 47
Click this button to change settings for the port connected to the printer. No changes need to be made here under normal circumstances. If the print output port is [PICTRO SCSI: (FUJIFILM PICTRO SCSI Port)], click this button to display the [PICTROGRAPHY port information] dialog box.
The settings entered here are assumed as default values for the application software [Print] command. 2. Image processing setting (Default value) Click the [Image processing setting] tab on the [FUJIFILM PICTROGRAPHY3500 Properties] dialog. For information on setup items, see “4.1.2 Print setup and print- ing”.
PICTROGRAPHY3500 Properties] dialog box. You can view, but not change the settings displayed here. 6. Image processing setting Click the [Image processing setting] tab on the [FUJIFILM PICTROGRAPHY3500 Properties] dialog box. You can view, but not change the settings displayed here.
PICTROGRAPHY3500 Properties] dialog box. These set- tings can be viewed, but not modified. 7. Image processing setting Click the [Image processing setting] tab in the [FUJIFILM PICTROGRAPHY3500 Properties] dialog box. These set- tings can be viewed, but not modified. 4.1.5.4 Windows XP 1.
7. Image processing setting Click the [Image processing setting] tab in the [FUJIFILM PICTROGRAPHY3500 Properties] dialog box. These setting can be viewed but not modified. 4.1.6 1. Color matching by ICM ICM is a Windows color management function. ICM allows close matches between the colors displayed on a computer monitor and those output from printers.
Page 52
4. USING THE PRINTER DRIVER When not checked: * When printing from Photoshop, set the image resolution to 400dpi. If the resolution is set to any other resolution except 400dpi, jaggies may appear on images. * When placing image data in PowerPoint, set the image reso- lution to 400dpi.
• ColorSync Check here to use the Mac OS color management function (ColorSync). * The printer driver supports ColorSync version 2.5 or later. The driver is incompatible with earlier versions. * For network printing, the server copy of ColorSync must also be version 2.5 or later.
4. USING THE PRINTER DRIVER Application Indicates the name of the application for the name: print file. User name: Indicates the name of the user printing the file. 2. Checking the print status Open Print Monitor. If a print job is currently in progress, the corresponding docu- ment name and other data are displayed in the Status Display area (upper part of the screen).
Page 55
• Paper Size Select a paper size for printing. Note that the printable paper size depends on the type of paper currently loaded in the PICTROGRAPHY 3500. • Orientation Select an orientation of printing. 2. Setting print conditions Open the print data file and then select [Print] from the [File] menu.
4. USING THE PRINTER DRIVER OFF: Disables printer color matching. With this option selected, gray reproduction is deter- mined by settings for [Gray balance]. • Gray balance Select gray gradation and color balance, if Image process is set to OFF. Gray1: Suitable for printing with monitors having (2.2/9300) color temperatures of 9300K and...
Page 57
4. USING THE PRINTER DRIVER Printing of the suspended print job is held if you click the document name in the Spool List Display area and then click the [Hold] button. The held condition is canceled if you click the [Resume] button. The suspended print job is deleted from the Spool List if you click the document name in the Spool List Display area and then click the [Delete] button.
• Error detected in print monitor. Error code: XXXX The system has become unstable, or the printer driver may not have been installed properly. Restart the computer. If this does not correct the problem, reinstall the FUJIFILM PICTROGRAPHY3500 printer driver.
Page 59
Macintosh: • Failed to obtain printer information. Reselect printer using selec- tor. Reselect the PICTROGRAPHY 3500 with [Chooser]. • Connection to server not set. Set an appropriate server. Network printing requires a server. When the server setup dialog box is displayed, enter settings in the [PictroGraphy] folder (previously mounted) on the computer directly connected to the PICTROGRAPHY 3500.
6. RESTRICTIONS 6.1 Windows 1. Installing the printer driver without connecting the PICTROGRAPHY 3500 (Windows 95/98) While it is possible to install the printer driver in a computer without first connecting the PICTROGRAPHY, or with the printer switched off, the PICTROGRAPHY 3500 after installa- tion will then be detected as a new device the next time Win- dows launches with the PICTROGRAPHY 3500 connected or powered on, causing the printer driver to be installed again.
Page 61
4. About the print quality of rotated characters The print quality obtained when printing rotated characters de- pends on the application from which printing occurs. Since the PICTROGRAPHY 3500 printer driver does not sup- port picture comments, the print quality of rotated characters is often poorer than that of non-rotated characters.
6. RESTRICTIONS • On [Printer List] of Print Center, shared printers are displayed with a colored background. • If a computer runs Mac OS X 10.1.x or earlier (including Mac OS 9 or earlier), the computer cannot recognize the printers shared with the printer sharing function of Mac OS X 10.2.1 or later.
Page 63
Heesenstrasse 31, 40549 Dusseldorf, Germany FUJI PHOTO FILM (U.K.) LTD. Fuji Film House, 125 Finchley Road, Swiss Cottage, London NW3 6JH, England FUJIFILM ESPAÑA, S.A. Aragon, 180, 08011-Barcelona, Spain FUJIFILM FRANCE SA Parc d'Activites du Pas-du-Lac-2, Avenue Franklin, St.Quentin-en-Yvelines Cedex, France in South America FUJI PHOTO FILM DO BRASIL LTDA.
Need help?
Do you have a question about the PICTOGRAPHY 3500 and is the answer not in the manual?
Questions and answers