Table of Contents
Advertisement
1. Right-click on the desktop, and click Personalize.
2. Click Display at the left.
3. Click Change display settings.
4. Click Advanced Settings.
5. Click the Monitor tab.
6. Click Properties.
7. Click the Driver tab.
8. Click Update Driver.
9. Select Browse my computer for driver software, and then click Let me pick from a list of device
drivers on my computer.
10. Click Have Disk.
11. Specify path C:\SWTOOLS\DRIVERS\MONITOR to this monitor INF file. Then, click Open.
12. Click OK.
13. Confirm the correct display type, then click Next.
14. When installation completes, click Close.
15. Click Close to close the Display Properties window.
16. Click OK on the Monitor tab.
17. Click OK and close the Display Settings window.
Installing other drivers and software
The device drivers are provided in the C:\SWTOOLS\DRIVERS directory on your hard disk drive. You will also
need to install application software, which is provided in the C:\SWTOOLS\APPS directory on your hard disk
drive.
Nota: If you cannot find the Supplement files, device drivers, and application software you need on
your hard disk drive, or if you want to receive updates and the latest information about them, go to
http://www.lenovo.com/drivers.
Lenovo Setup
Your computer comes with the Lenovo Setup program to enable you to select various setup parameters.
To start Lenovo Setup, do the following:
1. Turn on the computer. When the logo screen is displayed, press the F1 key. the Lenovo Setup program
main menu opens.
If you have set a supervisor password, the Lenovo Setup program main menu will be displayed after you
enter the password. You can start Lenovo Setup by pressing Enter instead of entering the supervisor
password. However, you cannot change the parameters that are protected by the supervisor password.
For more information, refer to "Using passwords" na página 41.
2. Using the cursor keys, move to an item you want to change. When the item is highlighted, press
Enter. A submenu is displayed.
3. Change the items you wish to change. To change the value of an item, press the following keys:
• Fn+F5 or –: Change to a lower value.
• Fn+F6 or the combination of Shift and +: Change to a higher value.
If the item has a submenu, you can display it by pressing Enter.
4. Press Esc to exit from the submenu.
5. If you are on a nested submenu, press Esc repeatedly until you reach the Lenovo Setup program
main menu.
74
User Guide
Advertisement
Table of Contents
