Lenovo G360 User Manual page 44

Appendix A. CRU instructions
7 Hold the SATA receptacle connector with one hand and pull the hard
disk drive (secured in the metal frame) in the direction shown below to
detach the connectors
8 Remove the screws and detach the metal frame from the hard disk drive.
9 Attach the metal frame to a new hard disk drive and tighten the screws.
0 Reconnect the hard disk drive (secured in the metal frame) to the SATA
receptacle connector, then carefully reinstall the hard disk drive in the
compartment with the tab facing upwards.
A Reinstall the frame fixing screws.
B Reinstall the compartment cover and tighten the screws.
C Reinstall the battery pack.
D Turn the computer over again. Connect the AC adapter and the cables to
the computer again.
40
e
.
e