Gigabyte GA-B75-DS3V User Manual page 13

1/2) ATX_12V_2X4/ATX (2x4 12V Power Connector and 2x12 Main Power Connector)
With the use of the power connector, the power supply can supply enough stable power to all the com-
ponents on the motherboard. Before connecting the power connector, first make sure the power supply
is turned off and all devices are properly installed. The power connector possesses a foolproof design.
Connect the power supply cable to the power connector in the correct orientation.
The 12V power connector mainly supplies power to the CPU. If the 12V power connector is not con-
nected, the computer will not start.
To meet expansion requirements, it is recommended that a power supply that can withstand high power con-
sumption be used (500W or greater). If a power supply is used that does not provide the required power, the
result can lead to an unstable or unbootable system.
1 5
4 8
ATX_12V_2X4
12 24
1 13
ATX
ATX_12V_2X4:
Pin No. Definition
1 GND (Only for 2x4-pin
12V)
2 GND (Only for 2x4-pin
12V)
3 GND
4 GND
ATX:
Pin No. Definition
1 3.3V
2 3.3V
3 GND
4 +5V
5 GND
6 +5V
7 GND
8 Power Good
9 5VSB (stand by +5V)
10 +12V
11 +12V (Only for 2x12-pin
ATX)
12 3.3V (Only for 2x12-pin
ATX)
- 13 -
Pin No. Definition
5 +12V (Only for 2x4-pin 12V)
6 +12V (Only for 2x4-pin 12V)
7 +12V
8 +12V
Pin No. Definition
13 3.3V
14 -12V
15 GND
16 PS_ON (soft On/Off)
17 GND
18 GND
19 GND
20 -5V
21 +5V
22 +5V
23 +5V (Only for 2x12-pin ATX)
24 GND (Only for 2x12-pin
ATX)