LG 42LB1DR - 42" LCD Integrated HDTV Owner's Manual page 148

512Een 3 80/11/24 5_03 PH Page 147
DataS:
All da_ are transmitted by I]exadedma[ code
Two!One part Channel: 6th bil
This bit is used in a cable ready system,
Using physical channel: 5th bit
If the channel band is NTSC air or N"[SC cable, channel
tuning can be done by only physical channel, In this
case, using physical channel bit must be [_w(O).
But if the charme[ band is ATSC air or ATSC cable, the_
are two cases that physical channel enable or disable
[f the physical channel sending is meaningffu[, you should
set this bit low(0), ffthe physical channel sending is
meaningless, you should set this bit high(] ).
Example)
1. Analog channel: NTSC cable, charade[ number(35),
main picture Command: ma O0 23 ×× xx ×x xx O1
attribute(O×O]): main picture, two part(it's not
mandatory), using physical channel, NTSC cable 'xx'
data: don't care major and minor channel number in
case analog channel tuning.
2. Digital channel: ATSC air, channel number(don t know
physical channel, maior(30), rninor(3))_ sub picture
Command: ma O0 xx O0 1E O0 03 A2
aRdbute(OxA2): sub picture, two part, not using
physical channd, ATSC air 'xx' data: don't care analog
channel number in case digital channel tuning.
3. Digital channel: ATSC aig channd number(physi-
cal(20),major(20), minor(3)), sub picture Command:
ma 00 14 00 14 00 03 82
a_ribute(Ox82): sub picture, two part, using physical
channel, ATSC air.
[ lING] pataO] [×]
29. @im_l _d/l:_l (comNnd: m b)
To add and ddete the channds
Data O: Channel Ddete Data 1 : Channd Add
A_:k_ow_dge_te_ [b] [ ] [Se_ID][ ][OK!NG] [Data][x]l
30. _ (Commnd: m c)
To sendIR remote keycode.
Tr_i_Sm,iS.siO_[m] [c][ ][Set [D][ ] [Data] [Cr]S ....
Data Key code Refer to page ]40.
_4_,,_e@:_me, t [c}[ ][Set _D} ( }(OK/Nq [Data] I x]
31. Input
$_(ComMInd: X b)
{_In P_ure Input)
To sele_ot input source for T'£
P_'s_ils_ 1×1 [ b]! 1 ]Is_t ID111 p ata] [Or1
Data O0 : DTV (Antenna)
Data 10 : Analog (Antenna)
Data 20 : AV 1
Data 40 : Component. 1
Data SO : RGB DTV
Data 90 : HDMJl/DVt
Data O1 :: DTV (Cable)
Data l'_ : Analog (Cable)
Data 2_ : AV2
Data 41 : Com_anent 2
Data 60 ; RGB PC
Data 91 : HDMI2
A_:Mo_@@emen_ [b] [ ] [Set [D] [ ] JOKING] [Data] [×]
32. PIP Input Select(Command:x y)
To adjust input source for sub picture in PIP mode.
_._mi_io_ MH [1[Set IDI[]1 p ata} Icd ..................
Data O0 : DTV (Antenna)
Data 01 : DTV (Cable)
Data 10 : Analog (Antenna)
Data 11 : Analog (Cable)
Data 20 : AV1
Data 21 : Av2
aa_,_i@_ge,_ [y][][Set ID][}IOKINq [Data} H
M
z
X
147