Warning Displays - FujiFilm FinePix S20 Pro Owner's Manual

Warning Displays

Warning Displayed
(Lit red)
(Blinking red)
Aperture/Shutter speed display
(Lit red)
eThe table below lists the warnings that are displayed on the screen.
Explanation
The camera batteries are low or completely
out of charge.
There is a strong likelihood of camera
shake because the shutter speed is slow.
The AF (auto focus) cannot work effectively.
Outside the AE continuous range.
No media is inserted.
i The media is not formatted.
i The xD-Picture Card contact area is
soiled.
i Camera fault.
i The xD-Picture Card contact area is
soiled.
i The media is damaged.
i The media format is incorrect.
i Camera fault.
The media is fully recorded.
i The file played back was not recorded
correctly.
i The xD-Picture Card contact area is
soiled.
i Camera fault.
i The camera was bumped during movie
playback from a Microdrive.
i You attempted to play a movie that was
not recorded on this camera.
The frame number has reached 999–9999. 1 Insert a formatted media into the camera.
i The data could not be recorded due to a
media error or a connection error
between the media and camera.
i The image cannot be recorded as it is
too large to fit in the available space on
the media.
A protected file was encountered.
Prints were specified for 1000 or more
frames in the DPOF frame settings.
Remedy
Load new or fully charged batteries.
Use flash photography. Use a tripod for some
scenes and modes.
i If the image is too dark, take the picture at a
distance of around 2 m (6.6 ft.) from the subject.
i Use AF lock to take the picture.
The shot can be taken, but the exposure will not
be correct.
Insert a media.
i Format the media.
i Wipe the contact area on the xD-Picture Card
with a soft dry cloth. It may be necessary to
format the xD-Picture Card. If the error message
is still displayed, replace the xD-Picture Card.
i Contact your FUJIFILM dealer.
i Wipe the contact area on the xD-Picture Card
with a soft dry cloth. It may be necessary to
format the xD-Picture Card. If the error message
is still displayed, replace the xD-Picture Card.
i Contact your FUJIFILM dealer.
Erase some images or use a media that has
ample free space.
i Images cannot be played back.
i Wipe the contact area on the xD-Picture Card
with a soft dry cloth. It may be necessary to
format the xD-Picture Card. If the error message
is still displayed, replace the xD-Picture Card.
i Contact your FUJIFILM dealer.
i Turn the camera off and then on again, or use
skip playback/frame rewind.
i Movies cannot be played back.
2 Set "RENEW" as the FRAME NO. setting in
the SET-UP menu.
3 Start taking pictures. (The frame numbers start
from "100-0001".)
4 Set "CONT." as the FRAME NO. setting in the
SET-UP menu.
i Re-insert the media or turn the camera off and
then on again. If the message is still displayed,
contact your FUJIFILM dealer.
i Use new media.
Protected files cannot be erased. Remove the
protection.
The maximum number of frames for which prints
can be specified on the same media is 999.
Copy the images for which you want to order
prints onto another media and then specify the
DPOF settings.
111