Asus H87M-PLUS User Manual page 32

5. USB 2.0 connectors (10-1 pin USB910; USB1112; USB1314)
These connectors are for USB 2.0 ports. Connect the USB module cable to any of
these connectors, then install the module to a slot opening at the back of the system
chassis. These USB connectors comply with USB 2.0 specification that supports up to
480Mbps connection speed.
H87M-PLUS
H87M-PLUS USB2.0 connectors
Never connect a 1394 cable to the USB connectors. Doing so will damage the
motherboard!
•
•
6. Digital audio connector (4-1 pin SPDIF_OUT)
This connector is for an additional Sony/Philips Digital Interface (S/PDIF) port. Connect
the S/PDIF Out module cable to this connector, then install the module to a slot
opening at the back of the system chassis.
H87M-PLUS
H87M-PLUS Digital audio connector
The S/PDIF module is purchased separately.
1-18
USB910
PIN 1
The USB 2.0 module is purchased separately.
These connectors are based on xHCI specification. We recommend you to install
the related driver to fully use the USB 2.0 ports under Windows
systems.
SPDIF_OUT
USB1112 USB1314
PIN 1 PIN 1
Chapter 1: Product introduction
7 or later operating
®