Table of Contents
Advertisement
A DIMM is keyed with a notch so that it fits in only one direction. DO NOT force a DIMM into
a socket in the wrong direction to avoid damaging the DIMM.
3.
Firmly insert the DIMM into the socket
until the retaining clips snap back in
place and the DIMM is properly seated.
1.4.4
Removing a DIMM
To remove a DIMM:
1.
Simultaneously press the retaining
clips outward to unlock the DIMM.
Support the DIMM lightly with
your fingers when pressing the
retaining clips. The DIMM might
get damaged when it flips out
with extra force.
2.
Remove the DIMM from the socket.
1.5
Expansion slots
In the future, you may need to install expansion cards. The following sub-sections describe
the slots and the expansion cards that they support.
Unplug the power cord before adding or removing expansion cards. Failure to do so may
cause you physical injury and damage motherboard components.
1-8
2
DIMM notch
1
Unlocked
retaining clip
DIMM slot key
2
DIMM notch
Chapter 1: Product introduction
3
Locked Retaining Clip
1
Hide quick links:
Advertisement
Table of Contents
