Mounting The Sd Card - Samsung SGH-T599N User Manual

Important! DO NOT remove a microSD card while the device is
accessing or transferring files. Doing so will result
in loss or damage of data. Make sure your battery
is fully charged before using the microSD card.
Your data may become damaged or lost if the
battery runs out while you are using the microSD
card.

Mounting the SD Card

To store photos, music, videos, and other applications. You
must mount (install) the SD card prior to use. Mounting the
SD card establishes a USB connection with your computer.
Important! You must enable USB storage to mount the SD
card.
1. From the Home screen, press
Settings Storage.
2. Tap Mount SD card.
55
Communicating with the SD card
Note: Your device is configured to be used as a storage/media
and then tap
1. Insert the SD card into the external, SD card slot.
For more information, refer to "Installing the microSD
Memory Card" on page 12.
2. Verify the card is properly mounted.
device by default. If it does not respond properly, you will
need to verify the Debugging mode is not enabled.
3. Configure the device for USB mass storage mode
connection by verifying Debugging mode is not
enabled:
• From the Home screen, press
Developer options.
• Remove a check mark from the USB debugging field, if
present.
• For more information, refer to "USB Debugging" on
page 277.
4. Connect the USB cable to the phone and connect the
cable to the computer.
and then tap Settings