Wi-Fi Advanced Settings - Samsung SGH-I537 User Manual

Manually Scan for a Wi-Fi Network
1. From the Home screen, tap
Connections Wi-Fi.
2. Tap Scan.
All available Wi-Fi networks are displayed.
Wi-Fi Status Indicators
The following icons show your Wi-Fi connection status at a
glance:
Displays when Wi-Fi is connected, active, and
communicating with a Wireless Access Point
(WAP).
Displays when there is a Wi-Fi access point
available but you are not connected to it. May also
display if there is a communication issue with the
target Wireless Access Point (WAP).
Displays when connected to another device using
Wi-Fi Direct. For more information, refer to "Wi-Fi
Direct" on page 175.

Wi-Fi Advanced Settings

Settings
The Advanced Wi-Fi menu allows you to set up many of your
device's advanced Wi-Fi services.
1. From the Home screen, tap
Connections Wi-Fi.
2. Press
The following options are available:
• Network notification: alerts you when a new WAP is available.
• Passpoint: allows you to connect to passpoint-enabled Wi-Fi
Access Points automatically. Touch and slide the slider to the
right to turn it on
• Keep Wi-Fi on during sleep: allows you to specify when to
disconnect from Wi-Fi.
• Check for Internet service: Checks if Wi-Fi internet service is
available when connected to an AP (Access Point).
• Auto connect: allows you to be automatically connected to an
AT&T Wi-Fi Hotspot as soon as your phone detects it.
• MAC address: view your device's MAC address, required
when connecting to some secured networks (not configurable).
• IP address: view your device's IP address.
Settings
Advanced.
.
Connections 174