Table of Contents
Advertisement
Network Operators
Using this feature you can view the current network
connection. You can also scan and select a network operator
manually, or set the network selection to Automatic.
1. From the Home screen, tap
settings
Mobile networks.
2. Tap Network operators.
3. Tap Search networks to manually search for a network.
4. Tap Select automatically to automatically select a
network connection.
Note: Connecting to 2G networks slows the data transfer
speed and time.
Default setup options
Your phone default is set to Automatic (to automatically
search for an available network. You can set this option to
Manual to select a network each time you connect.
1. From the Home screen, tap
settings
Mobile networks.
2. Tap Network operators.
3. Tap Default setup.
Tethering & portable hotspot
Settings
More
Mobile hotspot
Settings
More
4. Tap Manual to locate and connect to a network
manually, or tap Automatic to allow the device to
automatically select a network.
This option allows you to share your phones's mobile data
connection via USB or as a Mobile hotspot.
Note: To enable Mobile Hotspot on your phone, dial 611 or go
to
att.com/mywireless
1. From the Home screen, tap
settings
Tethering and portable hotspots
Hotspot.
2. Turn Mobile Hotspot on by tapping the slider so that it
changes to the ON position
The Portable Wi-Fi hotspot icon
top of your screen.
3. Tap Configure at the bottom of the screen.
4. Enter or edit the Network SSID, Hide my device,
Security setting, and Password.
to set up the service.
Settings
.
is displayed at the
Changing Your Settings
More
Mobile
107
Advertisement
Table of Contents
