Whirlpool WED4910XQ Installation Manual page 18

6.
Switch door catch, bezel, & plug
Catch and bezel
Remove the door catch, bezel, and plug from the inside of
the inner door by squeezing and pulling/pushing them. Place
the door catch, bezel, and plug on the sides opposite from
where they were.
7.
Rotate outer door
Rotate outer door 180º and set it back down on inner door.
Reattach outer door panel to inner door panel so handle is
on the side where hinges were just removed. Insert 4 door
screws.
18
8.
Plug
Flip door over so handle side is down.
9.
Reattach door hinges to dryer door so that the larger hole is
at the bottom of the hinge.
Flip door over
Attach door hinges