Samsung SHR5160500 - Electronics Gvi - Dvr 16ch Mpeg4 120ips Real Time User Manual page 69

The preset function is supported by all
cameras. You can set up to 20 presets.
But an active directory (AD) protocol
camera can have 7 presets.
The names of 2,3, and 4 may vary
depending on the camera vendor. And
those functions may not be supported by
some product.
 Samsung cameras support those
functions.
 In case of Panasonic cameras, the
names of AUTOPAN, SCAN, and
PATTERN are as following:
2 SEQUENCE 3 AUTOPAN 4 SORT.
 In case of PELCO cameras, the names
of AUTOPAN, SCAN, and PATTERN
are as following:
2 FRAME SCAN 3 AUTO SCAN
4 PATTERN.
 The other cameras do not support
those functions.
Self Menu Setup of PTZ device
1
1. You can configure the camera-related
settings using the PTZ camera menu.
1
1. This is the camera self menu screen.
The screen can be shown on Smart Viewer.
2. Use the Direction buttons for movement
between menus.
3. The button operates the same as the
ENTER button.
The Camera Menu Setup function is
supported for Samsung and Panasonic
cameras only.
When a DVR is using the PTZ camera
controls, Smart Viewer cannot control
CAUTION
the PTZ camera. The PTZ camera
controls can be used by the Admin
user.
2
3
Smart Viewer _65