Asus Ez Flash 2 Utility - Asus G1-P7P55E User Manual

Updating from a BIOS file
a. Select Update BIOS from a file, then click Next.
b. Locate the BIOS file from the Open window, then click Open.
3. Follow the onscreen instructions to complete the updating process.
5.1.2. ASUS.EZ.Flash.2.utility
The ASUS EZ Flash 2 feature allows you to update the BIOS without using an
OS-based utility.
To update the BIOS using EZ Flash 2:
1. Insert the USB flash disk that contains the latest BIOS file to the USB port,
then launch EZ Flash 2 in any of these two ways:
• Press <Alt>.+.<F2> during POST.
• Enter the BIOS setup program. Go to the Tools menu to select EZ.Flash.
2 and press <Enter> to enable it.
Press <Tab> to switch between drives until the correct BIOS file is
found.
ASUSTek EZ Flash 2 BIOS ROM Utility V4.10
FLASH TYPE:
BOARD:
VER:
DATE:
PATH: A:\
A:
Note
[Enter] Select or Load
[Up/Down/Home/End] Move
4. When the correct BIOS file is found, EZ Flash 2 performs the BIOS update
process and automatically reboots the system when done.
Only a USB flash disk with FAT.32/16.format and single partition can
•
support the ASUS EZ Flash 2 utility.
• Do not shut down or reset the system while updating the BIOS to prevent
system boot failure!
ASUS G1-P7P55E
MXIC 25L1605A
Current ROM
G1-P7P55E
0306 (H;00 B:03)
12/04/2009
[Tab] Switch
[B] Backup
Update ROM
BOARD: Unknown
VER: Unknown
DATE: Unknown
[V] Drive Info
[ESC] Exit
5-3