Connectors - Asus G1-P7P55E User Manual

4.4

Connectors

1.. CPU.and.chassis.fan.connectors.
(4-pin.CPU_FAN,.3-pin.CHA_FAN1,.3-pin.CHA_FAN2)
Connect the fan cables to the fan connectors on the motherboard, ensuring
that the black wire of each cable matches the ground pin of the connector.
Do not forget to connect the fan cables to the fan connectors. Insufficient air
flow inside the system may damage the motherboard components. These are
not jumpers! Do not place jumper caps on the fan connectors!
P7P55-M_DP fan connectors
Only the 4-pin CPU fan connector supports the ASUS Q-FAN feature.
2.. Serial.ATA.connectors.(7-pin.SATA1-6)
These connectors are for the Serial ATA signal cables for Serial ATA hard disk
drives.
P7P55-M_DP
P7P55-M_DP SATA connectors
Install the Windows
4-4
P7P55-M_DP
XP Service Pack 2 or later version before using Serial ATA.
®
CPU_FAN
GND
+12V
Rotation
CHA_FAN1
CHA_FAN2
GND
GND
RSATA_TXN1 RSATA_TXN2
RSATA_TXP1 RSATA_TXP2
GND
GND
RSATA_RXN1 RSATA_RXN2
RSATA_RXP1
RSATA_RXP2
GND GND
GND GND
RSATA_TXN3
RSATA_TXN4
RSATA_TXP3 RSATA_TXP4
GND
GND
RSATA_RXN3 RSATA_RXN4
RSATA_RXP3
RSATA_RXP4
GND GND
Chapter 4: Motherboard info