Time - D-Link DIR-860L User Manual

Section 3 - Configuration
The Time Configuration option allows you to configure, update, and maintain the correct time on the internal system clock.
From this section you can set the time zone that you are in and set the Time Server. You have the option of using
is short for Network Time Protocol. An NTP server will sync the time and date with your router. Daylight Saving can also be
configured to automatically adjust the time when needed.

Time:

Displays the current date and time of the router.
Time Zone: Select your Time Zone from the drop-down menu.
Enable Daylight Check to enable manual entry of daylight saving
Saving: time.
Daylight Saving When daylight saving manual entry is enabled, the
Offset: offset value is one hour by default.
Daylight Saving Enter a start date, an end date, including day of the
Dates: week, and time for daylight saving time.
Automatically This option is strongly recommended. Check the
Synchronize with box to have the router connect to an NTP server on
D-Link's Internet the Internet (not a local server).
Time Server:
NTP Server Used: Select an NTP server from the drop-down box and
click Update Now.
Set the Time and To manually input the time, enter the values in these
Date Manually: fields for the Year, Month, Day, Hour, Minute, and
Second and then click Save Settings.
You can also click Sync. Your Computer's Time
Settings to synch the date and time with the
computer you are currently on.
D-Link DIR-860L User Manual
Time
which
NTP,
98