FujiFilm FinePix FinePix F710 Owner's Manual page 29

p PHOTO MODE STILL PHOTOGRAPHY
1
1 0 2 0
3 0
2
1 0 2 0
ＣＯＬＯＲ ＣＯＬＯＲ
Ｂ＆Ｗ Ｂ＆Ｗ
ＣＨＲＯＭＥ ＣＨＲＯＭＥ
ＳＴＡＮＤＡＲＤ ＳＴＡＮＤＡＲＤ
The contrast and color saturation are set to standard. Use this mode for normal
p-STANDARD
photography.
The contrast and color saturation are set to high. This feature is effective for taking more
p-CHROME
vivid shots of subjects such as scenery (blue sky and greenery) and flowers.
p-B&W This setting converts the colors in the photographed image to black and white.
3
１９ １９
Ｐ
２５０ ２５０ Ｆ５．６ Ｆ５．６
56
J FinePix COLOR
q
1 Set the Power switch to " ".
2 Set the Mode dial to Still photography mode.
3 Press the Photo mode ( p ) button.
●
!
In " r " Movie mode, do not set the " J " FinePix COLOR
setting.
The FinePix COLOR setting is retained even when
the camera is turned off or the Mode dial is
changed.
J
1 Press "d" or "c" to select the "
COLOR setting and then press "a" or "b" to
change the setting.
2 Press the "MENU/OK" button to confirm the
setting.
●
!
p -CHROME may have little visible effect with some subjects,
such as close-up shots of people (portraits).
●
!
Because the effects on the image differ depending on the
p
scene being shot in -CHROME mode, take pictures in
standard mode as well as this mode. Note that you may not
be able to see any difference on the LCD monitor.
●
!
p p
For shots taken in -CHROME mode or
automatic quality adjustment will be suppressed on Exif Print
compliant printers.
p p
When setting -CHROME or -B&W, the icon
appears on the LCD monitor.
p
-CHROME:
p
-B&W:
STILL PHOTOGRAPHY MENU
q STILL PHOTOGRAPHY MENU OPERATION
1
2
0 1
" FinePix
3
Ｐ
-B&W mode,
* Self-timer
Use this setting for taking pictures such as
group shots where the photographer is included
in the shot.
A White balance
Change the white balance setting to take a
picture with the white balance fixed for the
surroundings and lighting when the picture is
taken.
+ Focusing
Set the focusing method.
Press the "MENU/OK" button to display the menu.
1 Press "d" or "c" to select the menu item and
2 0
"a" or "b" to change the setting.
2 Press the "MENU/OK" button to confirm the
selection.
ＳＥＬＦ−ＴＩＭＥＲ ＳＥＬＦ−ＴＩＭＥＲ
ＯＦＦ ＯＦＦ
When you enable the setting, an icon appears in
１９ １９
the top-left corner of the LCD monitor.
●
!
The settings available in the menu screen vary depending on
２５０ ２５０ Ｆ５．６ Ｆ５．６
the Still photography mode.
➡P.58
j Bracketing
Use this setting to photograph the same image
with different exposure settings.
➡P.59
G Sharpness
Use this setting to soften or emphasize outlines
or to adjust the quality of the image.
➡P.61 z Flash brightness adjustment ➡P.63
Change this setting to adjust the amount of light
emitted by the flash to suit the photography
conditions or to achieve a desired effect.
3
➡P.63
➡P.63
57