T Image Quality; U Dynamic Range; C White Balance - FujiFilm FinePix F70EXR Owner's Manual

T IMAGE QUALITY

T IMAGE QUALITY
Choose how much image files are compressed.
Select FINE (low compression) for higher image
quality, NORMAL (high compression) to increase
the number of pictures that can be stored.

U DYNAMIC RANGE

U
DYNAMIC RANGE
Control contrast. Higher values are
recommended for scenes that include both
sunlight and deep shade or for increased
contrast when photographing such subjects as
sunlight on water, brightly-lit autumn leaves, and
portraits taken against a blue sky; note, however,
that mottling may appear in pictures taken at
higher values. If AUTO is selected, the camera
will automatically select values between 100%
and 400% in response to shooting conditions.
A Note
D 800% is available only when U DYNAMIC
RANGE is selected in O mode and an option
other than d Velvia/VIVID or e ASTIA/SOFT is
selected for W FILM SIMULATION.
Using the Menus: Shooting Mode
C

C WHITE BALANCE

WHITE BALANCE
For natural colors, choose a setting that matches
the light source (for an explanation of "white
balance," see the Glossary on page 108).
Option Option
White balance adjusted automatically.
AUTO
Q
Measure a value for white balance.
p
For subjects in direct sunlight.
q
For subjects in the shade.
s
Use under "daylight" fluorescent lights.
t
Use under "warm white" fluorescent lights.
u
Use under "cool white" fluorescent lights.
r
Use under incandescent lighting.
If AUTO does not produce the desired results (for
example, when taking close-ups), select Q and
measure a value for white balance or choose the
option that matches the light source.
Description Description
69