Troubleshooting - FujiFilm FINEPIX BL00840-200 E Owner's Manual

Troubleshooting

Power and Battery
Problem Problem
The battery is exhausted.
The camera does
The battery is not in the correct orientation. Reinsert the battery in the correct orientation.
not turn on.
The AC adapter and DC coupler are not con-
nected properly.
The battery is cold.
Power
There is dirt on the battery terminals.
The battery runs
supply
down quickly.
Y is selected for shooting mode.
The battery has been charged many times.
The battery is exhausted.
The camera
turns off sud-
The AC adapter or DC coupler has been dis-
denly.
connected.
The battery is not correctly inserted.
Charging does
not start.
The battery is not in the correct orientation. Reinsert the battery in the correct orientation.
Charging is slow. The temperature is low.
Battery
There is dirt on the battery terminals.
The charging
charger
lamp lights, but
the battery does The battery has been charged many times.
not charge.
Possible cause Possible cause Solution Solution
Charge the battery or insert a fully-charged
spare battery.
Make sure that the AC adapter and DC coupler
are properly connected.
Warm the battery by placing it in a pocket or
other warm place and reinsert it in the camera
immediately before taking a picture.
Clean the terminals with a soft, dry cloth.
Select other shooting modes to reduce the
drain on the battery.
The battery has reached the end of its charging
life. Purchase a new battery.
Charge the battery or insert a fully-charged
spare battery.
Make sure that the AC adapter and DC coupler
are properly connected.
Reinsert the battery in the charger.
Charge the battery at room temperature.
Clean the terminals with a soft, dry cloth.
The battery has reached the end of its charging
life. Purchase a new battery. If the battery still
fails to charge, contact your FUJIFILM dealer.
Page Page
7, 8
8
—
v, 8
—
31
—
7, 8
—
7
7
v
—
98
81