HP Nc6400 - Compaq Business Notebook Maintenance And Service Manual page 113

4. Slide the Bluetooth module 1 to the right until the left side
of the module is clear of the left side of the clip in the base
enclosure.
5. Swing the left side of the Bluetooth module 2 out of the base
enclosure.
6. Slide the Bluetooth module 3 to the left until it is removed
from the base enclosure.
7. Disconnect the Bluetooth module cable 4 from the Bluetooth
module.
8. Remove the Bluetooth module.
✎
The Bluetooth module cable is included with the Bluetooth
module spare part kit and is also available in the Cable Kit,
spare part number 418876-001.
Removing the Bluetooth Module
Reverse the above procedure to install a Bluetooth module.
Maintenance and Service Guide
Removal and Replacement Procedures
5–13