Photography Menu Y Setting The Quality; Flash; Auto Auto Flash Mode - FujiFilm FinePix A403 Owner's Manual

y
SETTING THE QUALITY
PHOTOGRAPHY MENU
ＱＵＡＬＩＴＹ ＱＵＡＬＩＴＹ
４Ｍ ４Ｍ １９ １９
２Ｍ ３９ ３９
１Ｍ ４９ ４９ ＦＲＡＭＥＳ ＦＲＡＭＥＳ
0.3 .3Ｍ １２２ １２２
This mode can be selected in the "
" S " still photography modes.
You can choose from 4 settings. Use the table on
the right as a guide for selecting the best setting
for the shot you want to take.
G
!
The numbers to the right of each setting show the
number of available shots.
G
!
When you change the quality, the number of
38
available shots also changes.
✽ Displaying the menus (➡P.36)
Use Quality
4 (2304 × 1728)
Printing
2 (1600 × 1200)
1 (1280 × 960)
` ( 640 × 480)
Internet
<Examples>
hFor printing on A4 paper →
4
hFor printing on A5 paper →
2
A
",
hFor printing on A6 (postcard) paper →
hFor an image attached to E-mail or used on a
website →
`
G
!
Image quality can be changed afterwards using
FinePixViewer software, which is provided with
camera.
PHOTOGRAPHY MENU
ＦＬＡＳＨ ＦＬＡＳＨ
ＡＵＴＯ ＡＵＴＯ
This mode can be selected in the "
1
" S " still photography modes.
Use the flash mode that best suits your shot.
h5 modes: "AUTO", "
hEffective flash range (in "
Approx. 0.8 m to 3.0 m (2.6 ft. to 9.8 ft.)
G
!
If you use the flash in very dusty conditions or when it
is snowing, white dots may appear in the image due to
the flash reflecting off the dust particles or snowflakes.
Try taking the shot with the flash switched off.
G
!
The flash charging time may increase if the charge
remaining in the batteries is low.
G
!
When you take a shot using the flash, you may see
the video image disappear and the screen go dark
as the flash charges. The viewfinder lamp blink
orange while the flash is charging.
c FLASH
A
", Auto Flash Mode
AUTO
Use this mode for ordinary photography. The
flash fires automatically as required by the
shooting conditions.
n ", " c ", " b " or " v "
A
AUTO" mode):
G
!
Do not use this setting in Macro (close-up)
photography.
✽ Displaying the menus (➡P.36)
3
39