Canon imageCLASS MF4880dw Starter Manual page 19

1
USB Connection
Install the software.
Install the MF Drivers and the MF Toolbox. Make sure that the machine is turned ON, and log on to Windows as a
user with administrative privileges. Shut down all applications that are running. See the e-Manual for details about
installation.
Do not connect the USB cable yet.
Connect the USB cable after installing the MF Drivers and the MF Toolbox.
If you already connected the USB cable:
Windows 7: Disconnect the USB cable from the computer,
proceed to step .
Windows Vista/XP: If the dialog box on the right appears, disconnect the
USB cable from the computer*,
step .
* If the USB cable is disconnected and the dialog box disappears, proceed to step
User Software CD-ROM
• Printer, fax, scanner drivers and MF Toolbox
will be installed.
• Select [Custom Installation] to install Presto!
PageManager and the e-Manual.
If the screen is not correctly displayed:
• Windows XP/Server 2003
[Start] Menu → [Run] → enter [D:\MInst.exe*]
→ [OK]
1 2
Preface Installing the Machine
Windows
click [Cancel], and then proceed to
Click! Click!
◀ ◀
3
Connecting to a Computer and Installing the Drivers
Connecting to the Computer
and then
.
For Windows Vista/XP
• Windows Vista/7/Server 2008
[Start] Menu → [Search programs and fi les]
(or [Start Search]) → enter [D:\MInst.exe*] →
press the [Enter] key
* The CD-ROM drive name is indicated as "D:" in this
manual.
Follow the instructions
on the screen to continue.
• Remove the CD-ROM, if necessary.
Proceed to P.20
4
Configuring and Connecting the Fax
Select ✔ ✔ Select
◀ ◀
Click! Click!
◀ ◀
19