Omnm Download Instructions; Omnm Pre-Installation Checklist - Dell PowerConnect W-IAP175P Quick Setup Manual

Dell Networking Mobility Starter Kit – Quick Setup Guide

OMNM Download instructions:

Navigate to the URL: http://www.dell.com/NetworkManager
Click on "Click here to download"
Fill in the required information on the registration form and you will be sent an email with a link to
download the software. Included in the download package are the OpenManage Network Manager User
Guide and Quick Start Guide. During the install, refer to both these documents to customize to your
network settings.

OMNM Pre-Installation Checklist

To assist in installing OMNM, please use the following lists as reference:
Know the following before installation of OMNM 5.1:
•
Select devices (IP addresses) and ports to monitor.
•
Select IP address for OMNM server.
Configure IP address as a management station and receiver of SNMP traps on each
o
device.
•
IP Range of devices being discovered.
•
Determine if OMNM is going to use SNMPv1/v2/v3 to talk to the device.
•
Telnet credential for devices being discovered.
•
HTTP/HTTPs credentials for devices being discovered.
•
WMI credentials for server discovery.
•
Verify any firewalls have open ports between the devices on OMNM servers.
•
Setup SNMP and telnet/ssh username and password credentials on the 5500 Series PoE switch
and Instant Virtual Controller. These credentials are used by OMNM to manage the device.
•
Review device and OMNM release notes.
Install the following:
•
Active Perl -> Reboot system
•
Latest Java client
•
Latest Adobe Flash player
•
Latest Adobe Reader
Supported Web Browsers:
•
Chrome (v6 and above)
•
Safari (v 5 and above)
•
Firefox (v 3.6 and above)
16