Remote Control Unit - Sharp Aquos LC-32GA9E Operation Manual

Quick guide

Remote control unit

m (Teletext)
(See page 20.)
3 (Freeze/Hold)
(See page 20.)
B (Standby/On)
Enter standby mode or
turn on the power.
(See page 7.)
[ (Subtitle for Teletext)
(See page 20.)
OK
Execute a command within the
menu screen.
Display the programme list.
(See page 7.)
END
Exit the menu screen.
i (k/l) (Volume)
i (k) Increase the volume.
i (l) Decrease the volume.
0–9
Set the channel in TV mode.
Set the page in Teletext mode.
A (Flashback)
Press to return to the previous
image in normal viewing mode.
2 (Sound mode)
Select the sound multiplex mode.
(See below.)
NICAM TV broadcasts selection
Signal Selectable items
Stereo NICAM STEREO, MONO
Bilingual NICAM CH A, NICAM CH B,
NICAM CH AB, MONO
Monaural NICAM MONO, MONO
A2 TV broadcasts selection
Signal
Selectable items
Stereo
STEREO, MONO
Bilingual CH A, CH B, CH AB
Monaural MONO
NOTE
• When no signal is input, the sound mode will display "MONO".
1 (Subpage)
(See page 20.)
SLEEP
Set the sleep timer in units of 30
min. up to max. 2hr. 30min.
k (Reveal hidden Teletext)
(See page 20.)
p (Display information)
(See page 20.)
RETURN
Return to the previous menu
screen.
a/b/c/d (Cursor)
Select a desired item on the
setting screen.
MENU
Display the MENU screen.
(See page 10.)
Colour (Red/Green/Yellow/
Blue)
(See page 20.)
e (Mute)
Switch the sound on and off.
P (r/s)
TV: Select the channel.
External: Switch to TV input mode.
Teletext: Move to the next/previous
page.
b (INPUT SOURCE)
Select an input source.
(TV, EXT1, EXT2, EXT3, EXT4,
EXT5, EXT6)
(See page 8.)
f (WIDE MODE)
Select the wide mode.
(See page 19.)
Set the area of magnification in
Teletext mode. (See page 20.)
truD
Demonstrate the truD effects in a
dual screen format.
(See page 13.)
5