Manual Station Setting; Digital Radio Stations Search - Sharp Aquos LC-26GD7E Operation Manual

Manual station setting

Note: not with DVB-T stations in UK (refer to note on "LCN" on page 13).
You can also search for and store stations manually. However, detailed
knowledge is necessary for manual programming.
1. Activate the appropriate menu – depending on whether you want to set
TV or radio stations – in the respective mode (TV or Radio) with the
MENU button.
2. Select "Setup – Channels" in the "TV menu" or "Radio menu".
3. Select the entry "Manual tune" and confi rm with OK.
4. Now enter the necessary setting parameters for each menu item. Press
the INFO button, if you need explanations of the individual menu items.
Notes:
Several radio and TV stations can be broadcast on every channel.
•

Digital radio stations search

Your receiver can play radio stations via DVB in high quality.
Note: Digital radio stations are not broadcasted in the DVB-T standard in
all regions at present.
Radio stations are stored in a separate station table.
You can search for and store digital radio stations in the "Radio menu".
1. Switch to radio mode with the RADIO button.
Radio: 16 Antenne
EXT1
EXT2
EXT4
AUDIO IN
1 B5 AKTL
2 BAYERN 1
3 BR4 KLSK
4 SUNSHINE
5 ROCK ANT
6 ANTENNE
7 DLR
8 DLF
OK
...
0
2. Use MENU to call up the "Radio menu" and select "Channels".
14
9 HR-INFO
D
10 MDR INFO
D
11 MDR FIGA
D
12
NDR KULT
D
13 SWR1
D
14 SWR2
D
15 WDR3
D
16 WDR5
D D
17 OESTER 1
D D
18 MDR JUMP
D D
19 JAZZ RAD
D D
20 BLUSAT20
D D
Switch to ... Scan stations
OK
Select station
Previous station
9
Screen off Change sorting
3. Confi rm with OK.
4. With the "Search wizard" you can have the radio stations searched for
automatically or manually.
In the "Change search settings" menu you can select the signal source
and search for and store "all" digital radio stations or "new ones only".
You can set the "Search method" to "Channel search" or "Frequency
search" in DVB-T.
In DVB-S you can decide whether you want "Use pre-programming"
and set the "Symbol rate" if necessary.
5. Finally enter from which station place the found stations are to be
stored.
6. Press the OK button.
Numerical
You now get a summary of the settings you have made.
7. Select the line "Start search".
8. Start the search with OK.
If radio stations have been found and stored you get a station table at the
end.
END
BACK
MENU
Radio menu
Channels Timer functions
Sound
Search wizard
Manual tune
Change stations
Radio menu -> Channels
Search wizard Manual tune Change stations
Change search settings
Start search
Search wizard
Your TV set performs the automatic search with the following settings:
Location of TV set Great Britain
Signal source Satellite 1: ASTRA 1 (DVB-S)
Scope of search All stations
Store stations beginning at ... Station preset 1 (vacant: 1300)
OK
END
BACK