TAKING PICTURES (
MODE
Number of Available Frames
The number of available shots is displayed on
the LCD monitor.
G
!
See P.39 for information on changing the quality.
G
!
The default quality setting "
" set at shipment is
1M.
I Standard number of shots per xD-Picture Card
Because the amount of data recorded varies depending on the subject, the number of available shots may not
decrease when recording ends, or may decrease by 2 frames. The discrepancy between the standard number of
available shots and the actual number of available shots increases in proportion to the capacity of the xD-Picture Card.
Quality mode
2M
F
•
1600 × 1200
Number of recorded pixels
Image Data Size
Approx. 620 KB
DPC-16 (16 MB)
25
DPC-32 (32 MB)
50
DPC-64 (64 MB)
101
DPC-128 (128 MB)
204
✽ Number of available shots displayed on the camera for a new xD-Picture Card formatted in the camera.
26
AUTO MODE )
49
49
1M
1M
1M
1M
2M
N
1M
•
1280 × 960
640 × 480
Approx. 390 KB
Approx. 320 KB
Approx. 130 KB
39
49
79
99
159
198
319
398
USING AF/AE LOCK
MODE
1
In a shot with this type of composition, the
subjects (two people in this case) are not in the
AF frame. If the shot is taken at this point, the
subjects will not be in focus.
0.3M
122
247
N
497
AF (Autofocus)/AE (Auto exposure) Lock
997
On the FinePix 2650, when you press the shutter button down half way, the focus and exposure settings
are fixed (AF/AE lock). If you want to focus on a subject that is off to one side of the image or if you want
to set the exposure before you compose the final shot, lock the AF and AE settings and then compose
and shoot your picture to get the best results.
2
49
49
1M
1M
Move the camera slightly so that one of the
subjects in the AF frame.
N
49
49
1M
1M
2
Continued over page...
27