Table of Contents
Advertisement
Make a Poster
You can print an enlarged image onto multiple separated sheets of paper. (4, 9, or 16 sheets available)
Open the original file to print with this function, load the paper whose size corresponds to the document size, and then follow
the steps shown below. The following instruction assumes that you intend to print the enlarged image onto 4 sheets.
1 1 1 1
Select "Print" from the "File" menu of your
application, switch the menu to "Function", and
then click the "N-Up/Poster" button.
2 2 2 2
Check the "Poster" button, and then select "Print
one page on four sheets".
3 3 3 3
Check the "Overlap" box and "Border" box.
Checking the "Border" box enables you to print borders on
each sheet of the output. Checking the "Overlap" box
enables you to print the overlapped portion onto two
consecutive sheets.
Poster
Reference:
Now, you can print with "Poster" function. After all
necessary sheets have been printed, go to the next step.
How to Use the
Online Manual
Printer Properties
4 4 4 4
Cut out the output along the border on each sheet.
When you have not checked "Overlap", it is recommended
not to cut off one of the margins of the two sheets to be
pasted so that you can paste them easily.
5 5 5 5
Paste the sheets by the overlapped portions.
Now, you have completed making a poster.
Print
Maintenance
Print
Cut along this border.
Use this portion to paste
the sheets to each other.
26
Troubleshooting
Advertisement
Table of Contents
