Sharp Aquos LC-20B4E Operation Manual page 30

Useful Features (Continued)
T T T
SUBPAGE SUBPAGE
MENU OK
SOUND SOUND MENU MENU
M M
CH CH
TV/VIDEO TV/VIDEO
28
AV Connections (Continued)
[2] For programmes
• The influence of the AV control voltage and of fast blank at programme
• When connecting a video device to the AV1 terminal, you need to adjust the
1
Perform steps 1 and 2 in
</>
[1] AV1/AV2 to display the "AV
connections" screen.
2
Press ]/[ to select "For
programmes", and then press OK
END
E E
to display the "For programmes"
screen.
MENU
]/[
3
Press ]/[ to select the "AV
control voltage" or "RGB on-screen
OK
display".
4
Press </> to select "yes" or "no".
• If the item concerned is set to "yes",
5
Press ]/[ to select "For decoder
connected to AV1", and then press
OK to display the decoder
programme selection screen.
6
Press ]/[ and/or </> to select
the programme for the decoder,
and then press OK. Repeat the
same procedure if you want to
specify other decoder programmes.
7
Press MENU to return to the "For
programmes" screen.
8
Press ]/[ to select "Sound from
AV1", and then press </> to select
the desired sound source.
9
Press END to exit.
positions from 0 to 199 can be set.
decoder programme settings.
Note:
the appropriate picture is through-
connected at all programme positions
from 0 to 199 when a control voltage/
an RGB signal is applied.
0
0
0 0
0 0
0
0
0
0 0
0