YBIKE Pewi Owner's Manual page 9

3. Handlebar Assembly B 3. Handlebar Assembly B
Insert
Screw
Insert
Screw
H
I
Securely fasten the wave bracket, seat and handlebar into place with the two short screws
(No. 9) using the set of larger Allen keys (No. 12) as in picture H.
NOTE there are 3 holes, only insert the two short screws into the 1st and 3rd holes. The
middle hole remains open and can be used to unassembled Pewi (as seen in step 4).
Insert the cover cap (No. 7) into the handlebar (No. 6) into the t-hole on the handlebar as in
picture I.
(WARNING: Make sure screw sets are tightened and not loose)
8