Navman VHF 7110 Quick Start Manual page 9

Scan/Stop Scanning a Favourite Channel
Base Unit and Handset
Scan all 3 Favourite Channels
Base Unit and Handset
Delete a Favourite Channel
Base Unit and Handset
Select ALL SCAN mode
Base Unit and Handset
9
• Select the favourite channel.
• Press to scan the favourite
SCAN
channel and the priority channel in
DUAL or TRI watch mode.
• Press again to stop.
SCAN
• Press .
3CH
• Hold down
SCAN
favourite channels and the priority
channel.
• Press again to stop.
SCAN
• Select the favourite channel.
• Hold down 3CH
(CH1, CH2 or CH3) disappears off
the LCD.
• Hold down
SCAN
all channels (and the priority
channel every 1.8 seconds).
NOTE: In Europe, scanning
functions may be limited or
blocked in some countries.
When a signal is received, scanning
stops at that channel. Press
to skip over an 'always busy'
channel and resume scanning.
• Press SCAN to stop at the current
channel.
NAVMAN
to scan all three
until the setting
to start scanning
ENT
VHF 7110 Quick Start Guide
SCAN
3CH
SCAN
3CH
SCAN