Features Top Panel I N S T R U M E N T VOLUME GAIN BASS TREBLE REVERB FEEDBACK CUT M I C R O P H O N E Rear Panel / Line Volume MIC IN Phantom Power Send / DI Input Return / Line...
Top Panel Features Pilot Light –– LED that indicates the amplifier is on. INPUT Jack –– Plug in your instrument here. The input can take a wide range of instrument signal levels based on how you set the gain control. GAIN Controls ––...
Fuse –– Protects the amplifier from electrical faults. Always replace with the correct fuse type as indicated on rear panel. AC Power Jack –– Plug in your detachable AC power cable here. Voltage selector –– To select between the mains voltages of different electrical systems, check to make sure this is set correctly before you use your amplifier and contact your dealer or ZT Amplifiers directly if you have any questions.
• SERVICING AND PARTS – Do not attempt to service this product yourself, as opening or removing covers may expose you to dangerous voltages or other hazards. Contact ZT Amplifiers to find warranty information or to locate authorized service personnel.
Keep the GAIN control as high as possible to reduce noise, turn down the VOLUME control to • compensate If you are still experiencing problems with your ZT Amplifiers product, please contact us at techsupport@ztamplifiers.com. Service For service within the United States please contact ZT Amplifiers at service@ztamplifiers.com for all service and repair questions.
Limited Warranty ZT Amplifiers, Inc., warrants that the ZT product you have purchased shall be free of defects in parts and workmanship if used under normal operating conditions for a period of one (1) year from the date of purchase. This limited warranty shall run to the original purchaser when purchased from an Authorized ZT Dealer and any transferee of a retail purchaser.
Need help?
Do you have a question about the Lunchbox Acoustic LBA1 and is the answer not in the manual?
Questions and answers