Warning Displays
The table below lists the warnings that are displayed on the LCD monitor.
Warning Displayed
(Lit red)
The batteries are low or completely out of charge.
V (Blinking red)
|
There is a strong likelihood of camera shake
because the shutter speed is slow.
The AF (autofocus) cannot work effectively.
{
The camera cannot shoot the picture at the correct
}
brightness due to too bright or dark shooting
condition.
Camera malfunction or fault.
[FOCUS ERROR]
[ZOOM ERROR]
Memory Card is not inserted when transferring
[NO CARD]
images.
• The Memory Card or internal memory is not
• The Memory Card was formatted on a PC.
[CARD NOT
• The Memory Card contact area is soiled.
INITIALIZED]
• Camera fault.
Explanation
formatted.
Remedy
Load new or fully charged batteries.
Use flash photography. A tripod may be
recommended, depending on the scene and mode.
• If the image is too dark, take the picture at a
distance of around 2 m (6.6 ft.) from the subject.
• Use AF lock to take the picture (➝p.29).
• Select Macro mode when taking close-up shots.
The picture can be taken, but the correct brightness
(exposure) will not be obtained.
• Turn the camera on again, taking care not to touch
the lens.
• Turn the camera off and on again. If the message
still appears, contact your FUJIFILM dealer.
Insert a Memory Card.
• Format the Memory Card or internal memory on
the camera (➝p.84).
• Format the Memory Card on the camera.
• Wipe the contact area on the Memory Card with a
soft, dry cloth. It may be necessary to format the
Memory Card (➝p.84). If the message still
appears, replace the Memory Card.
• Contact your FUJIFILM dealer.
Continued Q
107