Connections - RCA DTA800 Quick Start Manual

Step 2: Connections
Option 1: Your TV has an antenna jack only
TV
ANTENNA
2
3
OUTPUT
ANTENNA IN CH3
CH4 VIDEO
TO TV
Back of the RCA converter box
1
From antenna
Option 2: Your TV has Audio/Video jacks (red, white & yellow connectors)
TV
AUDIO IN
VIDEO IN L
2
OUTPUT
ANTENNA IN CH3 CH4
VIDEO
TO TV
Back of the RCA converter box
1
From antenna
Option 3: You also need to connect your VCR
TV
ANTENNA
3
4
ANTENNA OUT
CH4
ANTENNA IN CH3
2
5
OUTPUT
ANTENNA IN CH3 CH4 VIDEO
TO TV
Back of the RCA converter box
1
From antenna
SMART ANTENNA IN – For connecting a Smart Antenna. Refer to the antenna's user manual for proper connection.
DTA800B_EN(QSG).indd 2 DTA800B_EN(QSG).indd 2
AC120V
4
60Hz
AC~120V
L AUDIO R
SMART ANTENNA IN
R
AC120V
3
60Hz
AC~120V
L AUDIO
R
SMART ANTENNA IN
VCR
6
AC120V
60Hz
AC~120V
AUDIO
L R
SMART ANTENNA IN
Connect your existing antenna cable to the ANTENNA IN jack
1
of the Converter Box.
Connect the RF coaxial cable (supplied) from the OUTPUT TO
2
TV jack of the Converter Box to the ANTENNA jack of the TV
set.
3
Slide the CH3/CH4 selector on the back of the Converter Box to
the channel that is not in use in your area. The Converter Box
will send its video signal to either Channel 3 or 4 on your TV.
4 Connect the AC power cable of the Converter Box to a
suitable wall outlet.
Connect your existing antenna cable to the ANTENNA IN jack
1
of the Converter Box.
2
Connect the Audio/Video cables (not supplied) from the
Audio/Video OUT jacks (yellow, white, red) of the Converter
Box to the Audio/Video IN jacks on the TV set.
If there are more than two sets of Audio/Video jacks on the
TV set, connect only either AV1 or AV2 input jacks to those of
the Converter Box.
3 Connect the AC power cable of the Converter Box to a
suitable wall outlet.
Connect your existing antenna cable to the ANTENNA IN jack
1
of the Converter Box.
Connect the RF coaxial cable* (supplied) from the OUTPUT TO TV
2
jack of the Converter Box to the ANTENNA IN jack of the VCR.
Connect the RF coaxial cable* (not supplied) from the
3
ANTENNA OUT jack of the VCR to the ANTENNA IN jack of the
TV set.
Slide the CH3/CH4 selector on the back of the VCR to the
4
channel that is not in use in your area. The VCR will send its
video signal to either Channel 3 or 4 on your TV.
Slide the CH3/CH4 selector on the back of the Converter Box to
5
the channel that is not being used by the VCR; e.g., if you set the
VCR selector to CH3, slide the Converter Box selector to CH4.
Connect the AC power cable of the Converter Box to a
6
suitable wall outlet.
* You can also use Audio/Video cables (similar to option 2) if
the connection jacks are available on the VCR and TV.
12/6/07 10:59:26 AM 12/6/07 10:59:26 AM