Power Input - Power Acoustik AWB-10 Owner's Manual

CONNECTING THE POWER (Fig.1)
Vehicle's chassis ground
B
FUSE
The amplifier is equipped with a plug-in auto fuse protecting set against
fault conditions. Do not use a fuse with a higher value and never bridge
the fuse over.
C
L.E.D
The L.E.D is a dual color indicator, when the +12v and REM +12 volt
power both switch on, The L.E.D illuminated green. this means that
the amplifier begin to work. if L.E.D illuminated red colour, this means
the amplifier is shut down from protecting circuit(thermal protection
& short protection & overload protection).
To Power antenna
( )
25A

POWER INPUT