Viking CPA-7B Technical Practice
Viking CPA-7B Technical Practice

Viking CPA-7B Technical Practice

General purpose telecom paging system

Advertisement

TECHNICAL
TECHNICAL
adjustable analog PABX/KSU station ports as well as unused trunk inputs, the CPA-7B
will also interface directly with standard paging ports. For loud ringing, the CPA-7B gen-
erates an adjustable loud warble from a dry contact closure, a ringing C.O. or a ringing
analog PABX/KSU station.
The CPA-7B is easy to install and can eliminate the installation of multiple bells, relays
and paging cards.
• 6 watts of paging power (powers up to (8) 8 ohm
horns/speakers)
• Increased audio fidelity with low noise amplifier
• Interfaces with ringing C.O. lines, Centrex lines, paging
ports, unused phone system trunk inputs, or ringing
analog station ports
• 600 ohm audio output to connect multiple CPA-7B's for
larger paging applications
• (1) 8 ohm 25AE paging horn included
• Day/night switchable for paging/loud ring
• Ringing/alert tone volume adjustment
• Paging volume adjustment
• Selectable ring trip paging and night bell
• Background music is muted during page*
• 10 pin cage clamp terminal strip for easier wiring
• Provides "Night Bell" warble tone via contact closure
or ringing analog circuit
• Provides page "Alert" tone before paging
• Adjustable ring trip paging time out for auto disconnect
(disable timeout by removing JP1)
• Audio patch cord provided
The CPA-7B is a cost effective, multi-purpose, tele-
com paging system.
The CPA-7B features a low noise, high fidelity amplifi-
er, providing 6 watts of power for a variety of telecom
paging applications. It can also provide background
music* and night bell/common audible. In addition,
multiple units may be daisy-chained for larger paging
applications.
Compatible with ringing C.O. lines, Centrex lines and
• Paging and loud ringing for Centrex systems
• Paging and loud ringing for phone systems with
paging ports, unused analog station ports or unused
trunk inputs
Power: 120V AC/13.8V AC 1.25 A, UL listed adapter provided
Amplifier: 6 watts - to power up to (8) 8 ohm speakers (cas-
cadable to drive additional speakers)
Dimensions: 133 mm x 89 mm x 44 mm (5.25" x 3.5" x 1.75")
Shipping Weight: 1.36 kg (3 lbs)
Environmental: 0°C to 32°C (32°F to 90°F) with 5% to 95%
non-condensing humidity
Speakers: (1) 25AE paging horn provided
Sound Pressure Level: 110dB, 1KHz @ 1m with (1) 25AE
Paging Horn (included), each additional horn will drop the output
level of all horns by 1dB
Talk Battery Output: 19V DC (loop current 36mA nominal)
Maximum Speaker Cable Length: 91 m (300 ft) 18 AWG
Connections: (1) RJ11 jack, (1) 3.5mm (1/8") audio jack, (1)
2.1mm barrel jack
CPA-7B
CPA-7B
May 18, 2012

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CPA-7B and is the answer not in the manual?

Questions and answers

Summary of Contents for Viking CPA-7B

  • Page 1 C.O. or a ringing analog PABX/KSU station. The CPA-7B is easy to install and can eliminate the installation of multiple bells, relays and paging cards. • 6 watts of paging power (powers up to (8) 8 ohm •...
  • Page 2 Viking Electronics, Inc., 1531 Industrial Street, Hudson, WI 54016 (715) 386-8666 A. Ring Trip Paging with or without Night Bell 120V AC Step 1. Set the MODE SWITCH to the RING TRIP VIKING MODEL CPA-7B © position. PAGING RING / ALERT TONE...
  • Page 3 * Common Ring Trip Time Out Caution: N.O. Audible Adjustment POT Installation/Applications * Note: Night Transfer Switch (not included) Use Viking model NS-1 (DOD# 540) Up to (8) 8-Ohm speakers may be connected in parallel (1) 25AE Paging Horn (included)
  • Page 4 Horn (included) Due to the dynamic nature of the product design, the information contained in this document is subject to change without notice. Viking Electronics, and its affiliates and/or subsidiaries assume no responsibility for errors and omissions contained in this information. Revisions of this document or new editions of it may be issued to incorporate such changes.

Table of Contents