Ensuring reliable data collection
Do not disconnect the data collection device during data collection or
while the "Checking Sensors" screen is displayed.
Keep in mind that the lists containing previously collected data are
cleared when you select
modes.
In case of difficulty
Problem
Insufficient memory
Data doesn't look right
EasyData
. This applies to all data-collection
Start
Cause and/or solution
You must have sufficient memory for the EasyData App
and the data lists. EasyData needs 5000 bytes to run
effectively. You need to delete items from the calculator
memory.
To delete items on the TI-83 Plus, press y L, select
Mem Mgmt/Del
, select
to delete, and press {.
Check that the experiment conditions are correct,
and then repeat the sample.
All
, scroll to the item you wish
Page 23