Lenovo ThinkPad X300 Hardware Maintenance Manual page 106

98
ThinkPad X300 Hardware Maintenance Manual
Note: Applying labels to the base cover
The new base cover FRU is shipped with a kit containing labels of several kinds.
When you replace the base cover, you need to apply the following labels:
13
Product label
11
Homologation label
Following labels need to be peeled off from the old base cover, and need to be
put on the new base cover.
1
SIRM label
2
China modem label
3
Wireless WAN LMA label
4
Israel label
5
Windows license label (COA)
6
Blind sheet A
7
Information label
8
Wireless WAN IMEI label or wireless WAN ESN label
9
Wireless WAN MAC address label
10
MAC address label
12
Serial number label
14
SIM ICCID label
For some models, you also need to apply one or two FCC labels. Check the old
base cover; if it has one or two FCC labels, find duplicates of them in the label
kit and apply them to the new base cover.
For the location of each label, refer the following figure:
14
13
12
11
10
9
1 2
8 7
3
4
5
6