Table of Contents
Advertisement
●
RAW Development Processing
To perform RAW development processing, follow the procedure below.
1
From the [Edit] menu in the [Browse] window, select [RAW Development].
Alternatively, in the [Browse] window, click [Raw] on the toolbar.
The [RAW Development] window is displayed.
2
Do one of the following to register RAW files in the RAW file registration area.
• From the thumbnail area of the [RAW Development] window, select the RAW file to be processed
and click the [Add] button.
• Click the [Add All] button in the thumbnail area of the [RAW Development] window.
• Drag and drop the selected RAW files onto the RAW file registration area.
The preview display area shows the development results of the selected image, based on the settings in
the RAW development setting panel.
Tip
You can register two or more files in the RAW file registration area and develop them in a single operation.
3
If desired, set the following items in the RAW development setting area.
Tips
• To change the settings, drag the slider to the left or right, or select a value from the list.
• If you change the setting for any item, the [Default Settings] checkbox is cleared. To restore the
default settings, check the [Default Settings] checkbox again.
• When performing RAW development processing for multiple files in a single operation, the settings
are applied to all RAW files in the RAW file registration area.
• Noise Filter is set to ON regardless of the shooting conditions.
145
Advertisement
Table of Contents
