Resetting The Sound Settings To The Factory Defaults; Connecting Headphones; Selecting The Sound Mode; Setting And Displaying The Current Time - Samsung LA52F7 Owner's Instructions Manual

Resetting the Sound Settings to the Factory Defaults

Connecting Headphones

Selecting the Sound Mode

You can also set these options
simply by pressing the DUAL
button on remote control.

Setting and Displaying the Current Time

T V Clock Set
Move Adjust
If Game Mode is On, the Reset Sound function is activated. Selecting the Reset
function after setting the equalizer resets the equalizer setting to the factory
defaults.
1. Press the MENU button to display the menu. Press the
select "Sound", then press the ENTER button.
2. Press the
3. Press the EXIT button to exit.
You can select this option when the "Game Mode" is set to "On".
You can connect a set of headphones to your set if you wish to watch a
TV programme without disturbing the other people in the room.
When you insert the head set jack into the corresponding port,
you can operate only "Internal Mute" and "Sound Select" (in PIP mode) in Sound menu.
(Refer to "Selecting the Internal Mute" on page 18)
Prolonged use of headphones at a high volume may damage your hearing.
You will not receive sound from the speakers when you connect headphones to the system.
You can set the sound mode by pressing the "DUAL" button.
When you press it, the current sound mode is displayed on the screen.
FM
Stereo
NICAM
Stereo
If the stereo signal is weak and an automatic switching occurs, then switch to the Mono.
You can set the TV's clock so that the current time is displayed when you press
the INFO button. You must also set the time if you wish to use the automatic
On/Off timers.
1. Press the MENU button to display the menu. Press the
select "Setup", then press the ENTER button.
Return
2. Press the
3. Press the ENTER button to select "Clock Set".
4.
To...
Move to "Hour" or "Minute", "am/pm"
Set the "Hour" or "Minute", "am/pm"
Press the ENTER button.
5. Press the EXIT button to exit.
If you disconnect the power cord, you have to set the clock again.
You can also set hour and minute by pressing the number buttons on the remote control.
or button to select "Reset", then press the ENTER button.
Audio Type
Mono
Stereo
Dual
Mono
Stereo
Dual
or button to select "Time", then press the ENTER button.
English-19
or button to
DUAL 1/2
MONO
STEREO ↔ MONO
DUAL 1 ↔ DUAL 2
MONO
MONO ↔ STEREO
MONO ↔ DUAL 1
DUAL 2
or button to
Press the...
or button.
or button.
Default
Automatic
change
DUAL 1
Automatic
change
DUAL 1