Questions And Answers; Windows Related; Display Related - Samsung Q45c User Manual

Questions and Answers

This section provides information on possible problems, solutions and other references for system use.

Windows Related

Q
The system does not shutdown properly.
A When the system does not shutdown normally, press
and hold the Power button until the system manually
shuts off. If the Power-Saving Mode is configured
into the Power button, press and hold for more than
4 seconds to shut the system off. When the system
is turned on after such manual shutdown, Scandisk
will run to check errors in the system.
Q
The system freezes during program operation.
A1 There is an error with the program currently being
used. Press the <Ctrl>, <Alt>, and <Delete> keys
simultaneously and click End Task in the Windows
Task Manager window.
A2 There is an error with the Windows OS. Reboot the
system by using the Power button.

Display Related

Q
The LCD screen is too dark or too bright
A Turn on the LCD backlight or adjust the screen
brightness. Press Fn + (
backlight or press Fn + (
the screen brightness.
Q
The screen saver disturbs screen viewing during
Media Player or video file operation.
A Click Tools > Options > Player and then clear the
Allow screen saver during playback in the Media
Center check box.
Q
In the following cases, the screen blinks or
displays noise for a short time (This only applies
to nVidia graphics card.): (Click the Graphics
Related tab, Change Resolution, Change Display
Device, Remove the AC Adapter, Restart the
System, Change PowerMizer level.)
A This may happen while the video driver is examining
the connected device. While detecting, any
connected display devices may blink or some noise
may occur.
1
) to turn on the LCD
), Fn + ( ) to adjust