Setup Menu; Setting The Time - Samsung 5 series User Manual

Basic Features
Audio Language
TOOLS
(digital channels only)
Change the default value for audio languages.
✎
The available language may differ depending on the
broadcast.
Multi-Track Sound (MTS)
(analog channels only)
FAV.CH
: Choose for channels that are
Mono
■
broadcasting in mono or if you are having
difficulty receiving a stereo signal.
Stereo : Choose for channels that are
■
broadcasting in stereo.
SAP : Choose to listen to the Separate Audio Program,
■
which is usually a foreign-language translation.
S.MODE
✎
Depending on the particular program being broadcast,
you can listen to Mono, Stereo or SAP.
Auto Volume (Off / Normal / Night)
To equalize the volume level on each channel, set to Normal.
SLEEP
Night : This mode provides an improved sound
■
experience compared to Normal mode, making almost
no noise. It is useful at night.
Speaker Select
(External Speaker / TV Speaker)
A sound echo may occur due to a difference in decoding
speed between the main speaker and the audio receiver.
In this case, set the TV to External Speaker.
✎
When Speaker Select is set to External Speaker, the
volume and buttons will not operate and the
MUTE
sound settings will be limited.
✎
When Speaker Select is set to External Speaker, you
should use these settings.
x
TV speaker: Off External speaker: On
✎
When Speaker Select is set to TV Speaker, you
should use these settings.
x
TV speaker: On External speaker: On
✎
If there is no video signal, both speakers will be mute.
SPDIF Output
SPDIF (Sony Philips Digital Interface) is used to provide digital
sound, reducing interference going to speakers and various
digital devices such as an A/V Receiver/Home theater.
Audio Format : During the reception of a digital TV
■
broadcast, you can select the Digital Audio output
(SPDIF) format from the options PCM or Dolby Digital.
✎
By connecting to 5.1ch speakers in a dolby
digital setup, maximize your interactive 3D sound
experience.
16
English
t
Audio Delay
■
P.MODE
watching TV or video, and when listening to digital audio
output using an external device such as an AV receiver
(0ms ~ 250ms).
FM Transmitter
You can listen to TV sound from FM receiver speaker by
transmitting audio signals by FM frequencies.
MTS
Connecting a FM Transmitter
✎
Not available in some locations.
You can listen to TV sound from FM receiver speaker
by transmitting audio signals by FM frequencies.
✎
For more detailed information, refer to
Setup". (P. 29)
CC
Insert FM Transmitter Module into the Socket which is
located at the side of TV.
FM Transmitter (Off / On)
■
FM Frequency
■
Sound Reset (OK / Cancel)
Reset all sound settings to the factory defaults.

Setting the Time

¦
O
MENU
Time
: Setting the clock is for using various timer
Clock
■
features of the TV.
O
The current time will appear every time you press
the
✎
If you disconnect the power cord, you have to set
the clock again.
Clock Mode: Set up the current time manually or
automatically.
– Auto
time from the digital channel.
✎
: Correct audio-video sync problems, when
P.SIZE
MEDIA.P
TV Side Panel
FM Transmitter
: Turns FM transmitter on/off.
: Sets FM transmitter frequency.

Setup Menu

m → Setup → Time → ENTERE
INFO button.
: Set the current time automatically using the
The antenna must be connected in order to set
the time automatically.
"FM Transmitter