Listening Through A Receiver; Troubleshooting For Anynet - Samsung 5 series User Manual

Advanced Features

Listening through a Receiver

¦
You can listen to sound through a receiver (i.e Home Theater) instead of the TV speaker.
1. Select Receiver and set to On.
2. Press the button to exit.
EXIT
✎
If your receiver supports audio only, it may not appear in the device list.
✎
The receiver will work when you have properly connected the optical in jack of the receiver to the
OUT (OPTICAL)
✎
When the receiver (i.e Home Theater) is set to
the TV is displaying a DTV (air) signal, the TV will send out 5.1 channel sound to the receiver. When the source is a
digital component such as a DVD and is connected to the TV via HDMI, only 2 channel sound will be heard from
the receiver.
✎
NOTE
x
You can only control Anynet+ devices using the TV remote control, not the buttons on the TV.
x
The TV remote control may not work under certain conditions. If this occurs, reselect the Anynet
x
The Anynet functions do not operate with other manufacturers' products.
+

Troubleshooting for Anynet

¦
Problem
Anynet does not work.
+
I want to start Anynet .
+
I want to exit Anynet .
+
The message 'Connecting to
Anynet device...' appears on
+
the screen.
The Anynet device does not
+
play.
The connected device is not
displayed.
The TV Program cannot be
recorded.
The TV sound is not output
through the receiver.
28
English
jack of the TV.
+
Possible Solution
• Check if the device is an Anynet
• Only one receiver (home theater) can be connected.
• Check if the Anynet
+
• Check the Anynet device's Video/Audio/HDMI cable connections.
+
• Check whether Anynet
• Check whether the TV remote control is in TV mode.
• Check whether the remote control is Anynet
• Anynet doesn't work in certain situations. (Searching channels, operating Media Play or Plug & Play
+
(initial setup), etc.)
• When connecting or removing the HDMI cable, please make sure to search devices again or turn your
TV off and on again.
• Check if the Anynet
+
• Check if the Anynet
+
set to On in the Anynet
• Press the TOOLS button to display the Anynet
• Select View TV in the Anynet
• Press the SOURCE
• Press > CH CH
<,
button operates only when a tuner-embedded Anynet
• You cannot use the remote control when you are configuring Anynet
• Use the remote control when the Anynet
• You cannot use the play function when
• Check whether or not the device supports Anynet+ functions.
• Check whether or not the HDMI cable is properly connected.
• Check whether Anynet
• Search Anynet devices again.
+
• You can connect an Anynet
Anynet functions.
+
• If it is terminated by an abnormal situation such as disconnecting the HDMI cable or power cord or a
power failure, please repeat the device scan.
• Check whether the antenna jack on the recording device is properly connected.
• Connect the optical cable between TV and the receiver.
On, you can hear sound output from the TV's Optical jack. When
device. The Anynet
+
device power cord is properly connected.
(HDMI-CEC) is set to On in the Anynet
+
compatible.
+
Function of Anynet device is set on.
+
device is properly connected to the TV and check if the Anynet
Setup menu.
+
menu and select a menu you want.
+
menu.
+
button on the TV remote control and select a device other than Anynet
LIST, PRE-CH, and FAV.CH
setting or switching to view mode is complete.
+
Plug & Play (initial setup) is in progress.
(HDMI-CEC) is set to On in the Anynet
+
device using the HDMI cable only. Some HDMI cables may not support
+
+
system supports Anynet devices only.
+ +
setup menu.
+
to change the TV mode. (Note that the channel
device is not connected.)
+
or switching to a view mode.
+
setup menu.
+
DIGITAL AUDIO
device.
(HDMI-CEC) is
+
devices.
+