Samsung LE40F8 Owner's Instructions Manual page 8

Supported modes for HDMI/DVI and Component
480i
HDMI/DVI 50Hz X
HDMI/DVI 60Hz X
Component O
4 ant In
To view television channels correctly, a signal must be received by the set from one of the following
sources:
- An outdoor aerial / A cable television network / A satellite network
5 Common InterFaCe Slot
- When not inserting "CI CARD" in some channels,"Scrambled Signal" is displayed on the screen.
- The pairing information containing a telephone number, CI CARD ID, Host ID and other information
will be displayed in about 2~3 minutes. If an error message is displayed, please contact your
service provider.
- When the channel information configuration has finished, the message "Updating Completed" is
displayed, indicating that the channel list is now updated.
You must obtain a CI CARD from a local cable service provider.
Remove the CI CARD by carefully pulling it out with your hands since dropping the CI CARD
may cause damage to it.
Insert the CI-Card in the direction marked on it.
6 WISelInK
- Connect a USB mass storage device to view photo files (JPEG) and play audio files (MP3)
7 headphones jack
- Headphone may be connected to the headphone output on your set. While the head phone is
connected, the sound from the built-in speakers will be disabled.
8 S-VIDeo or VIDeo / r-auDIo-l
- Connect RCA or S-VIDEO cable to an appropriate external A/V device such as VCR, DVD or
Camcorder.
- Connect RCA audio cables to "R - AUDIO - L" on your set and the other ends to corre
sponding audio out connectors on the A/V device.
9 PC In (PC)/(auDIo)
- Connect to the video and audio output jack on your PC.
0 DIgItal auDIo out (oPtICal)
- Connect to a Digital Audio Component.
! SerVICe
- Connect this to the jack on the optional wall mount bracket. This will allow you to adjust the TV
viewing angle using your remote control.
@ ComPonent In
- Connect component video cables (optional) to component connector ("P
your set and the other ends to corresponding component video out connectors on the DTV or DVD.
- If you wish to connect both the Set-Top Box and DTV (or DVD), you should connect the Set-Top Box
to the DTV (or DVD) and connect the DTV (or DVD) to component connector ("P
set.
- The P , P and Y connectors on your component devices (DTV or DVD) are sometimes labeled Y,
R B
B-Y and R-Y or Y, Cb and Cr.
- Connect RCA audio cables (optional) to "R - AUDIO - L" on the rear of your set and the other ends to
corresponding audio out connectors on the DTV or DVD.
- This LCD TV displays its optimum picture resolution in 1080p mode.
- This LCD TV displays its maximum picture resolution in 1080p mode.
# Kensington lock (depending on the model)
- The Kensington lock (optional) is a device used to physically fix the system when used in a public
place.
- If you want to use a locking device, contact the dealer where you purchased the TV.
- The place of the Kensington Lock may be different depending on its model.
480p 576i
X X
O X
O O
english - 
576p 720p
O O
X O
O O
R
1080i 1080p
O O
O O
O X
", "P ", "Y") on the rear of
B
", "P ", "Y") on your
R B