Table of Contents
Advertisement
Installation
Be sure to contact an authorized Service Center when installing your monitor in
a location with heavy dust, high or low temperatures, high humidity, and exposed
to chemical substances and where it operates for 24 hours such as at airports,
train stations etc.
Failure to do so may cause serious damage to your monitor.
Safety Instructions
Insert the power plug firmly so that it does not come loose.
•
A bad connection may cause fire.
Do not excessively bend the plug and wire nor place heavy objects
upon them, which could cause damage.
•
This may cause electric shock or fire.
Do not connect too many extension cords or plugs to one outlet.
•
This may cause fire.
Do not disconnect the power cord while using the monitor.
•
A surge may be caused by the separation and may damage the mon-
itor.
Do not use the power cord when the connector or plug is dusty.
•
If the connector or plug of the power cord is dusty, clean it with a dry
cloth.
•
Using the power cord with a dusty plug or connector may cause an
electric shock or fire.
To disconnect the apparatus from the mains, the plug must be pulled
out from the mains socket, therefore the mains plug shall be readily op-
erable.
•
This may cause electric shock or fire.
Place your monitor in a location with low humidity and a minimum
of dust.
•
Failure to do so may cause electric shock or fire inside the monitor.
Do not drop the monitor when moving it.
•
This may cause damage to the product or the person carrying it.
2
Advertisement
Table of Contents
